216 pages, 46 articles pour «prin»

Vous pouvez consulter la page d'explications relative au nuage de mots clés et aux techniques utilisées.

216 pages

  • Portes logiques
    https://www.gaudry.be > Généralités > Logique
    [1] 19/03/2002 - Dernière modification le 26/10/2018 Présentation en tableau des opérateurs logiques. Les principales portes logiques.
    Mot clé = ! | Niveau = 1

  • Attribute
    https://www.gaudry.be > Programmation > API Java
    [2] 30/08/2006 - Dernière modification le 16/10/2019 javax.print.attribute.Attribute Les API Java 1.5 du site de sun. En anglais...
    Mot clé = prin | Niveau = 2

  • AttributeException
    https://www.gaudry.be > Programmation > API Java
    [3] 31/08/2006 - Dernière modification le 16/10/2019 javax.print.AttributeException Les API Java 1.5 du site de sun. En anglais...
    Mot clé = prin | Niveau = 2

  • AttributeSet
    https://www.gaudry.be > Programmation > API Java
    [4] 31/08/2006 - Dernière modification le 16/10/2019 javax.print.attribute.AttributeSet Les API Java 1.5 du site de sun. En anglais...
    Mot clé = prin | Niveau = 2

  • AttributeSetUtilities
    https://www.gaudry.be > Programmation > API Java
    [5] 30/10/2006 - Dernière modification le 16/10/2019 javax.print.attribute.AttributeSetUtilities Les API Java 1.5 du site de sun. En anglais...
    Mot clé = prin | Niveau = 2

  • Book
    https://www.gaudry.be > Programmation > API Java
    [6] 29/08/2006 - Dernière modification le 16/10/2019 java.awt.print.Book Les API Java 1.5 du site de sun. En anglais...
    Mot clé = prin | Niveau = 2

  • CancelablePrintJob
    https://www.gaudry.be > Programmation > API Java
    [7] 31/08/2006 - Dernière modification le 16/10/2019 javax.print.CancelablePrintJob Les API Java 1.5 du site de sun. En anglais...
    Mot clé = prin | Niveau = 2

  • Chromaticity
    https://www.gaudry.be > Programmation > API Java
    [8] 06/12/2006 - Dernière modification le 16/10/2019 javax.print.attribute.standard.Chromaticity Les API Java 1.5 du site de sun. En anglais...
    Mot clé = prin | Niveau = 2

  • ColorSupported
    https://www.gaudry.be > Programmation > API Java
    [9] 06/12/2006 - Dernière modification le 16/10/2019 javax.print.attribute.standard.ColorSupported Les API Java 1.5 du site de sun. En anglais...
    Mot clé = prin | Niveau = 2

  • Compression
    https://www.gaudry.be > Programmation > API Java
    [10] 01/09/2006 - Dernière modification le 16/10/2019 javax.print.attribute.standard.Compression Les API Java 1.5 du site de sun. En anglais...
    Mot clé = prin | Niveau = 2

  • Copies
    https://www.gaudry.be > Programmation > API Java
    [11] 01/09/2006 - Dernière modification le 16/10/2019 javax.print.attribute.standard.Copies Les API Java 1.5 du site de sun. En anglais...
    Mot clé = prin | Niveau = 2

  • CopiesSupported
    https://www.gaudry.be > Programmation > API Java
    [12] 06/12/2006 - Dernière modification le 16/10/2019 javax.print.attribute.standard.CopiesSupported Les API Java 1.5 du site de sun. En anglais...
    Mot clé = prin | Niveau = 2

  • DateTimeAtCompleted
    https://www.gaudry.be > Programmation > API Java
    [13] 07/12/2006 - Dernière modification le 16/10/2019 javax.print.attribute.standard.DateTimeAtCompleted Les API Java 1.5 du site de sun. En anglais...
    Mot clé = prin | Niveau = 2

  • DateTimeAtCreation
    https://www.gaudry.be > Programmation > API Java
    [14] 06/12/2006 - Dernière modification le 16/10/2019 javax.print.attribute.standard.DateTimeAtCreation Les API Java 1.5 du site de sun. En anglais...
    Mot clé = prin | Niveau = 2

  • DateTimeAtProcessing
    https://www.gaudry.be > Programmation > API Java
    [15] 07/12/2006 - Dernière modification le 16/10/2019 javax.print.attribute.standard.DateTimeAtProcessing Les API Java 1.5 du site de sun. En anglais...
    Mot clé = prin | Niveau = 2

  • DateTimeSyntax
    https://www.gaudry.be > Programmation > API Java
    [16] 30/08/2006 - Dernière modification le 16/10/2019 javax.print.attribute.DateTimeSyntax Les API Java 1.5 du site de sun. En anglais...
    Mot clé = prin | Niveau = 2

  • Destination
    https://www.gaudry.be > Programmation > API Java
    [17] 07/12/2006 - Dernière modification le 16/10/2019 javax.print.attribute.standard.Destination Les API Java 1.5 du site de sun. En anglais...
    Mot clé = prin | Niveau = 2

  • Doc
    https://www.gaudry.be > Programmation > API Java
    [18] 29/08/2006 - Dernière modification le 16/10/2019 javax.print.Doc Les API Java 1.5 du site de sun. En anglais...
    Mot clé = prin | Niveau = 2

  • DocAttribute
    https://www.gaudry.be > Programmation > API Java
    [19] 30/08/2006 - Dernière modification le 16/10/2019 javax.print.attribute.DocAttribute Les API Java 1.5 du site de sun. En anglais...
    Mot clé = prin | Niveau = 2

  • DocAttributeSet
    https://www.gaudry.be > Programmation > API Java
    [20] 30/08/2006 - Dernière modification le 16/10/2019 javax.print.attribute.DocAttributeSet Les API Java 1.5 du site de sun. En anglais...
    Mot clé = prin | Niveau = 2

  • DocFlavor
    https://www.gaudry.be > Programmation > API Java
    [21] 16/09/2006 - Dernière modification le 16/10/2019 javax.print.DocFlavor Les API Java 1.5 du site de sun. En anglais...
    Mot clé = prin | Niveau = 2

  • DocFlavor.BYTE_ARRAY
    https://www.gaudry.be > Programmation > API Java
    [22] 23/12/2007 - Dernière modification le 16/10/2019 javax.print.DocFlavor.BYTE-ARRAY Les API Java 1.5 du site de sun. En anglais...
    Mot clé = prin | Niveau = 2

  • DocFlavor.CHAR_ARRAY
    https://www.gaudry.be > Programmation > API Java
    [23] 23/12/2007 - Dernière modification le 16/10/2019 javax.print.DocFlavor.CHAR-ARRAY Les API Java 1.5 du site de sun. En anglais...
    Mot clé = prin | Niveau = 2

  • DocFlavor.INPUT_STREAM
    https://www.gaudry.be > Programmation > API Java
    [24] 23/12/2007 - Dernière modification le 16/10/2019 javax.print.DocFlavor.INPUT-STREAM Les API Java 1.5 du site de sun. En anglais...
    Mot clé = prin | Niveau = 2

  • DocFlavor.READER
    https://www.gaudry.be > Programmation > API Java
    [25] 29/08/2006 - Dernière modification le 16/10/2019 javax.print.DocFlavor.READER Les API Java 1.5 du site de sun. En anglais...
    Mot clé = prin | Niveau = 2

  • DocFlavor.SERVICE_FORMATTED
    https://www.gaudry.be > Programmation > API Java
    [26] 30/10/2006 - Dernière modification le 16/10/2019 javax.print.DocFlavor.SERVICE-FORMATTED Les API Java 1.5 du site de sun. En anglais...
    Mot clé = prin | Niveau = 2

  • DocFlavor.STRING
    https://www.gaudry.be > Programmation > API Java
    [27] 29/08/2006 - Dernière modification le 16/10/2019 javax.print.DocFlavor.STRING Les API Java 1.5 du site de sun. En anglais...
    Mot clé = prin | Niveau = 2

  • DocFlavor.URL
    https://www.gaudry.be > Programmation > API Java
    [28] 29/08/2006 - Dernière modification le 16/10/2019 javax.print.DocFlavor.URL Les API Java 1.5 du site de sun. En anglais...
    Mot clé = prin | Niveau = 2

  • DocPrintJob
    https://www.gaudry.be > Programmation > API Java
    [29] 29/08/2006 - Dernière modification le 16/10/2019 javax.print.DocPrintJob Les API Java 1.5 du site de sun. En anglais...
    Mot clé = prin | Niveau = 2

  • DocumentName
    https://www.gaudry.be > Programmation > API Java
    [30] 06/12/2006 - Dernière modification le 16/10/2019 javax.print.attribute.standard.DocumentName Les API Java 1.5 du site de sun. En anglais...
    Mot clé = prin | Niveau = 2

  • EnumSyntax
    https://www.gaudry.be > Programmation > API Java
    [31] 31/08/2006 - Dernière modification le 16/10/2019 javax.print.attribute.EnumSyntax Les API Java 1.5 du site de sun. En anglais...
    Mot clé = prin | Niveau = 2

  • Fidelity
    https://www.gaudry.be > Programmation > API Java
    [32] 01/09/2006 - Dernière modification le 16/10/2019 javax.print.attribute.standard.Fidelity Les API Java 1.5 du site de sun. En anglais...
    Mot clé = prin | Niveau = 2

  • Finishings
    https://www.gaudry.be > Programmation > API Java
    [33] 07/12/2006 - Dernière modification le 16/10/2019 javax.print.attribute.standard.Finishings Les API Java 1.5 du site de sun. En anglais...
    Mot clé = prin | Niveau = 2

  • FlavorException
    https://www.gaudry.be > Programmation > API Java
    [34] 29/08/2006 - Dernière modification le 16/10/2019 javax.print.FlavorException Les API Java 1.5 du site de sun. En anglais...
    Mot clé = prin | Niveau = 2

  • HashAttributeSet
    https://www.gaudry.be > Programmation > API Java
    [35] 31/08/2006 - Dernière modification le 16/10/2019 javax.print.attribute.HashAttributeSet Les API Java 1.5 du site de sun. En anglais...
    Mot clé = prin | Niveau = 2

  • HashDocAttributeSet
    https://www.gaudry.be > Programmation > API Java
    [36] 01/09/2006 - Dernière modification le 16/10/2019 javax.print.attribute.HashDocAttributeSet Les API Java 1.5 du site de sun. En anglais...
    Mot clé = prin | Niveau = 2

  • HashPrintJobAttributeSet
    https://www.gaudry.be > Programmation > API Java
    [37] 06/12/2006 - Dernière modification le 16/10/2019 javax.print.attribute.HashPrintJobAttributeSet Les API Java 1.5 du site de sun. En anglais...
    Mot clé = prin | Niveau = 2

  • HashPrintRequestAttributeSet
    https://www.gaudry.be > Programmation > API Java
    [38] 07/12/2006 - Dernière modification le 16/10/2019 javax.print.attribute.HashPrintRequestAttributeSet Les API Java 1.5 du site de sun. En anglais...
    Mot clé = prin | Niveau = 2

  • HashPrintServiceAttributeSet
    https://www.gaudry.be > Programmation > API Java
    [39] 07/12/2006 - Dernière modification le 16/10/2019 javax.print.attribute.HashPrintServiceAttributeSet Les API Java 1.5 du site de sun. En anglais...
    Mot clé = prin | Niveau = 2

  • Instructions IO
    https://www.gaudry.be > Programmation > C & C++
    [40] 19/03/2002 - Dernière modification le 26/10/2018 Principales instructions d’entrées/sorties (printf, scanf, getchar, fopen, etc.).
    Mot clé = prin | Niveau = 2

  • IntegerSyntax
    https://www.gaudry.be > Programmation > API Java
    [41] 30/08/2006 - Dernière modification le 16/10/2019 javax.print.attribute.IntegerSyntax Les API Java 1.5 du site de sun. En anglais...
    Mot clé = prin | Niveau = 2

  • java.awt.print
    https://www.gaudry.be > Programmation > API Java
    [42] 30/08/2006 - Dernière modification le 16/10/2019 java.awt.print Les API Java 1.5 du site de sun. En anglais...
    Mot clé = prin | Niveau = 2

  • javax.print
    https://www.gaudry.be > Programmation > API Java
    [43] 30/08/2006 - Dernière modification le 16/10/2019 javax.print Les API Java 1.5 du site de sun. En anglais...
    Mot clé = prin | Niveau = 2

  • javax.print.attribute
    https://www.gaudry.be > Programmation > API Java
    [44] 30/10/2006 - Dernière modification le 16/10/2019 javax.print.attribute Les API Java 1.5 du site de sun. En anglais...
    Mot clé = prin | Niveau = 2

  • javax.print.attribute.standard
    https://www.gaudry.be > Programmation > API Java
    [45] 23/01/2007 - Dernière modification le 16/10/2019 javax.print.attribute.standard Les API Java 1.5 du site de sun. En anglais...
    Mot clé = prin | Niveau = 2

  • javax.print.event
    https://www.gaudry.be > Programmation > API Java
    [46] 30/08/2006 - Dernière modification le 16/10/2019 javax.print.event Les API Java 1.5 du site de sun. En anglais...
    Mot clé = prin | Niveau = 2

  • JobHoldUntil
    https://www.gaudry.be > Programmation > API Java
    [47] 07/12/2006 - Dernière modification le 16/10/2019 javax.print.attribute.standard.JobHoldUntil Les API Java 1.5 du site de sun. En anglais...
    Mot clé = prin | Niveau = 2

  • JobImpressions
    https://www.gaudry.be > Programmation > API Java
    [48] 07/12/2006 - Dernière modification le 16/10/2019 javax.print.attribute.standard.JobImpressions Les API Java 1.5 du site de sun. En anglais...
    Mot clé = prin | Niveau = 2

  • JobImpressionsCompleted
    https://www.gaudry.be > Programmation > API Java
    [49] 07/12/2006 - Dernière modification le 16/10/2019 javax.print.attribute.standard.JobImpressionsCompleted Les API Java 1.5 du site de sun. En anglais...
    Mot clé = prin | Niveau = 2

  • JobImpressionsSupported
    https://www.gaudry.be > Programmation > API Java
    [50] 07/12/2006 - Dernière modification le 16/10/2019 javax.print.attribute.standard.JobImpressionsSupported Les API Java 1.5 du site de sun. En anglais...
    Mot clé = prin | Niveau = 2

  • JobKOctets
    https://www.gaudry.be > Programmation > API Java
    [51] 06/12/2006 - Dernière modification le 16/10/2019 javax.print.attribute.standard.JobKOctets Les API Java 1.5 du site de sun. En anglais...
    Mot clé = prin | Niveau = 2

  • JobKOctetsProcessed
    https://www.gaudry.be > Programmation > API Java
    [52] 06/12/2006 - Dernière modification le 16/10/2019 javax.print.attribute.standard.JobKOctetsProcessed Les API Java 1.5 du site de sun. En anglais...
    Mot clé = prin | Niveau = 2

  • JobKOctetsSupported
    https://www.gaudry.be > Programmation > API Java
    [53] 07/12/2006 - Dernière modification le 16/10/2019 javax.print.attribute.standard.JobKOctetsSupported Les API Java 1.5 du site de sun. En anglais...
    Mot clé = prin | Niveau = 2

  • JobMediaSheets
    https://www.gaudry.be > Programmation > API Java
    [54] 06/12/2006 - Dernière modification le 16/10/2019 javax.print.attribute.standard.JobMediaSheets Les API Java 1.5 du site de sun. En anglais...
    Mot clé = prin | Niveau = 2

  • JobMediaSheetsCompleted
    https://www.gaudry.be > Programmation > API Java
    [55] 07/12/2006 - Dernière modification le 16/10/2019 javax.print.attribute.standard.JobMediaSheetsCompleted Les API Java 1.5 du site de sun. En anglais...
    Mot clé = prin | Niveau = 2

  • JobMediaSheetsSupported
    https://www.gaudry.be > Programmation > API Java
    [56] 07/12/2006 - Dernière modification le 16/10/2019 javax.print.attribute.standard.JobMediaSheetsSupported Les API Java 1.5 du site de sun. En anglais...
    Mot clé = prin | Niveau = 2

  • JobMessageFromOperator
    https://www.gaudry.be > Programmation > API Java
    [57] 06/12/2006 - Dernière modification le 16/10/2019 javax.print.attribute.standard.JobMessageFromOperator Les API Java 1.5 du site de sun. En anglais...
    Mot clé = prin | Niveau = 2

  • JobName
    https://www.gaudry.be > Programmation > API Java
    [58] 09/01/2010 - Dernière modification le 16/10/2019 javax.print.attribute.standard.JobName
    Mot clé = prin | Niveau = 2

  • JobName
    https://www.gaudry.be > Programmation > API Java
    [59] 01/09/2006 - Dernière modification le 16/10/2019 javax.print.attribute.standard.JobName Les API Java 1.5 du site de sun. En anglais...
    Mot clé = prin | Niveau = 2

  • JobOriginatingUserName
    https://www.gaudry.be > Programmation > API Java
    [60] 07/12/2006 - Dernière modification le 16/10/2019 javax.print.attribute.standard.JobOriginatingUserName Les API Java 1.5 du site de sun. En anglais...
    Mot clé = prin | Niveau = 2

  • JobPriority
    https://www.gaudry.be > Programmation > API Java
    [61] 06/12/2006 - Dernière modification le 16/10/2019 javax.print.attribute.standard.JobPriority Les API Java 1.5 du site de sun. En anglais...
    Mot clé = prin | Niveau = 2

  • JobPrioritySupported
    https://www.gaudry.be > Programmation > API Java
    [62] 06/12/2006 - Dernière modification le 16/10/2019 javax.print.attribute.standard.JobPrioritySupported Les API Java 1.5 du site de sun. En anglais...
    Mot clé = prin | Niveau = 2

  • JobSheets
    https://www.gaudry.be > Programmation > API Java
    [63] 06/12/2006 - Dernière modification le 16/10/2019 javax.print.attribute.standard.JobSheets Les API Java 1.5 du site de sun. En anglais...
    Mot clé = prin | Niveau = 2

  • JobState
    https://www.gaudry.be > Programmation > API Java
    [64] 01/09/2006 - Dernière modification le 16/10/2019 javax.print.attribute.standard.JobState Les API Java 1.5 du site de sun. En anglais...
    Mot clé = prin | Niveau = 2

  • JobStateReason
    https://www.gaudry.be > Programmation > API Java
    [65] 16/09/2006 - Dernière modification le 16/10/2019 javax.print.attribute.standard.JobStateReason Les API Java 1.5 du site de sun. En anglais...
    Mot clé = prin | Niveau = 2

  • JobStateReasons
    https://www.gaudry.be > Programmation > API Java
    [66] 07/12/2006 - Dernière modification le 16/10/2019 javax.print.attribute.standard.JobStateReasons Les API Java 1.5 du site de sun. En anglais...
    Mot clé = prin | Niveau = 2

  • Le demi-additionneur
    https://www.gaudry.be > Généralités > Logique
    [67] 19/03/2002 - Dernière modification le 26/10/2018 Le demi-additionneur: principe d’addition, table de vérité, circuit logique.
    Mot clé = prin | Niveau = 2

  • MainForm
    https://www.gaudry.be > Programmation > C Sharp
    [68] 17/12/2006 - Dernière modification le 26/10/2018 La fenêtre principale de notre application Bibliobrol
    Mot clé = prin | Niveau = 2

  • Media
    https://www.gaudry.be > Programmation > API Java
    [69] 10/01/2010 - Dernière modification le 16/10/2019 javax.print.attribute.standard.Media
    Mot clé = prin | Niveau = 2

  • Media
    https://www.gaudry.be > Programmation > API Java
    [70] 31/08/2006 - Dernière modification le 16/10/2019 javax.print.attribute.standard.Media Les API Java 1.5 du site de sun. En anglais...
    Mot clé = prin | Niveau = 2

  • MediaName
    https://www.gaudry.be > Programmation > API Java
    [71] 07/12/2006 - Dernière modification le 16/10/2019 javax.print.attribute.standard.MediaName Les API Java 1.5 du site de sun. En anglais...
    Mot clé = prin | Niveau = 2

  • MediaPrintableArea
    https://www.gaudry.be > Programmation > API Java
    [72] 07/12/2006 - Dernière modification le 16/10/2019 javax.print.attribute.standard.MediaPrintableArea Les API Java 1.5 du site de sun. En anglais...
    Mot clé = prin | Niveau = 2

  • MediaSize
    https://www.gaudry.be > Programmation > API Java
    [73] 17/12/2006 - Dernière modification le 16/10/2019 javax.print.attribute.standard.MediaSize Les API Java 1.5 du site de sun. En anglais...
    Mot clé = prin | Niveau = 2

  • MediaSize.Engineering
    https://www.gaudry.be > Programmation > API Java
    [74] 15/01/2007 - Dernière modification le 16/10/2019 javax.print.attribute.standard.MediaSize.Engineering Les API Java 1.5 du site de sun. En anglais...
    Mot clé = prin | Niveau = 2

  • MediaSize.ISO
    https://www.gaudry.be > Programmation > API Java
    [75] 07/12/2006 - Dernière modification le 16/10/2019 javax.print.attribute.standard.MediaSize.ISO Les API Java 1.5 du site de sun. En anglais...
    Mot clé = prin | Niveau = 2

  • MediaSize.JIS
    https://www.gaudry.be > Programmation > API Java
    [76] 06/12/2006 - Dernière modification le 16/10/2019 javax.print.attribute.standard.MediaSize.JIS Les API Java 1.5 du site de sun. En anglais...
    Mot clé = prin | Niveau = 2

  • MediaSize.NA
    https://www.gaudry.be > Programmation > API Java
    [77] 06/12/2006 - Dernière modification le 16/10/2019 javax.print.attribute.standard.MediaSize.NA Les API Java 1.5 du site de sun. En anglais...
    Mot clé = prin | Niveau = 2

  • MediaSize.Other
    https://www.gaudry.be > Programmation > API Java
    [78] 07/12/2006 - Dernière modification le 16/10/2019 javax.print.attribute.standard.MediaSize.Other Les API Java 1.5 du site de sun. En anglais...
    Mot clé = prin | Niveau = 2

  • MediaSizeName
    https://www.gaudry.be > Programmation > API Java
    [79] 07/12/2006 - Dernière modification le 16/10/2019 javax.print.attribute.standard.MediaSizeName Les API Java 1.5 du site de sun. En anglais...
    Mot clé = prin | Niveau = 2

  • MediaTray
    https://www.gaudry.be > Programmation > API Java
    [80] 07/12/2006 - Dernière modification le 16/10/2019 javax.print.attribute.standard.MediaTray Les API Java 1.5 du site de sun. En anglais...
    Mot clé = prin | Niveau = 2

  • MultiDoc
    https://www.gaudry.be > Programmation > API Java
    [81] 29/08/2006 - Dernière modification le 16/10/2019 javax.print.MultiDoc Les API Java 1.5 du site de sun. En anglais...
    Mot clé = prin | Niveau = 2

  • MultiDocPrintJob
    https://www.gaudry.be > Programmation > API Java
    [82] 29/08/2006 - Dernière modification le 16/10/2019 javax.print.MultiDocPrintJob Les API Java 1.5 du site de sun. En anglais...
    Mot clé = prin | Niveau = 2

  • MultiDocPrintService
    https://www.gaudry.be > Programmation > API Java
    [83] 30/08/2006 - Dernière modification le 16/10/2019 javax.print.MultiDocPrintService Les API Java 1.5 du site de sun. En anglais...
    Mot clé = prin | Niveau = 2

  • MultipleDocumentHandling
    https://www.gaudry.be > Programmation > API Java
    [84] 07/12/2006 - Dernière modification le 16/10/2019 javax.print.attribute.standard.MultipleDocumentHandling Les API Java 1.5 du site de sun. En anglais...
    Mot clé = prin | Niveau = 2

  • NumberOfDocuments
    https://www.gaudry.be > Programmation > API Java
    [85] 07/12/2006 - Dernière modification le 16/10/2019 javax.print.attribute.standard.NumberOfDocuments Les API Java 1.5 du site de sun. En anglais...
    Mot clé = prin | Niveau = 2

  • NumberOfInterveningJobs
    https://www.gaudry.be > Programmation > API Java
    [86] 07/12/2006 - Dernière modification le 16/10/2019 javax.print.attribute.standard.NumberOfInterveningJobs Les API Java 1.5 du site de sun. En anglais...
    Mot clé = prin | Niveau = 2

  • NumberUp
    https://www.gaudry.be > Programmation > API Java
    [87] 01/09/2006 - Dernière modification le 16/10/2019 javax.print.attribute.standard.NumberUp Les API Java 1.5 du site de sun. En anglais...
    Mot clé = prin | Niveau = 2

  • NumberUpSupported
    https://www.gaudry.be > Programmation > API Java
    [88] 07/12/2006 - Dernière modification le 16/10/2019 javax.print.attribute.standard.NumberUpSupported Les API Java 1.5 du site de sun. En anglais...
    Mot clé = prin | Niveau = 2

  • OrientationRequested
    https://www.gaudry.be > Programmation > API Java
    [89] 18/11/2006 - Dernière modification le 16/10/2019 javax.print.attribute.standard.OrientationRequested Les API Java 1.5 du site de sun. En anglais...
    Mot clé = prin | Niveau = 2

  • OutputDeviceAssigned
    https://www.gaudry.be > Programmation > API Java
    [90] 06/12/2006 - Dernière modification le 16/10/2019 javax.print.attribute.standard.OutputDeviceAssigned Les API Java 1.5 du site de sun. En anglais...
    Mot clé = prin | Niveau = 2

  • P-code
    https://www.gaudry.be > Programmation > Compilateur
    [91] 31/07/2010 - Dernière modification le 28/10/2018 Pcode généré par le compilateur pour le langage LSD, et la GPMachine
    Mot clé = prin | Niveau = 2

  • package-tree
    https://www.gaudry.be > Programmation > API Java
    [92] 24/12/2007 - Dernière modification le 16/10/2019 java.awt.print.package-tree Les API Java 1.5 du site de sun. En anglais...
    Mot clé = prin | Niveau = 2

  • package-tree
    https://www.gaudry.be > Programmation > API Java
    [93] 24/12/2007 - Dernière modification le 16/10/2019 javax.print.package-tree Les API Java 1.5 du site de sun. En anglais...
    Mot clé = prin | Niveau = 2

  • package-tree
    https://www.gaudry.be > Programmation > API Java
    [94] 24/12/2007 - Dernière modification le 16/10/2019 javax.print.attribute.package-tree Les API Java 1.5 du site de sun. En anglais...
    Mot clé = prin | Niveau = 2

  • package-tree
    https://www.gaudry.be > Programmation > API Java
    [95] 24/12/2007 - Dernière modification le 16/10/2019 javax.print.attribute.standard.package-tree Les API Java 1.5 du site de sun. En anglais...
    Mot clé = prin | Niveau = 2

  • package-tree
    https://www.gaudry.be > Programmation > API Java
    [96] 24/12/2007 - Dernière modification le 16/10/2019 javax.print.event.package-tree Les API Java 1.5 du site de sun. En anglais...
    Mot clé = prin | Niveau = 2

  • Pageable
    https://www.gaudry.be > Programmation > API Java
    [97] 29/08/2006 - Dernière modification le 16/10/2019 java.awt.print.Pageable Les API Java 1.5 du site de sun. En anglais...
    Mot clé = prin | Niveau = 2

  • PageFormat
    https://www.gaudry.be > Programmation > API Java
    [98] 29/08/2006 - Dernière modification le 16/10/2019 java.awt.print.PageFormat Les API Java 1.5 du site de sun. En anglais...
    Mot clé = prin | Niveau = 2

  • PageRanges
    https://www.gaudry.be > Programmation > API Java
    [99] 06/12/2006 - Dernière modification le 16/10/2019 javax.print.attribute.standard.PageRanges Les API Java 1.5 du site de sun. En anglais...
    Mot clé = prin | Niveau = 2

  • PagesPerMinute
    https://www.gaudry.be > Programmation > API Java
    [100] 06/12/2006 - Dernière modification le 16/10/2019 javax.print.attribute.standard.PagesPerMinute Les API Java 1.5 du site de sun. En anglais...
    Mot clé = prin | Niveau = 2

  • PagesPerMinuteColor
    https://www.gaudry.be > Programmation > API Java
    [101] 07/12/2006 - Dernière modification le 16/10/2019 javax.print.attribute.standard.PagesPerMinuteColor Les API Java 1.5 du site de sun. En anglais...
    Mot clé = prin | Niveau = 2

  • Paper
    https://www.gaudry.be > Programmation > API Java
    [102] 10/08/2006 - Dernière modification le 16/10/2019 java.awt.print.Paper Les API Java 1.5 du site de sun. En anglais...
    Mot clé = prin | Niveau = 2

  • PDLOverrideSupported
    https://www.gaudry.be > Programmation > API Java
    [103] 06/12/2006 - Dernière modification le 16/10/2019 javax.print.attribute.standard.PDLOverrideSupported Les API Java 1.5 du site de sun. En anglais...
    Mot clé = prin | Niveau = 2

  • PresentationDirection
    https://www.gaudry.be > Programmation > API Java
    [104] 07/12/2006 - Dernière modification le 16/10/2019 javax.print.attribute.standard.PresentationDirection Les API Java 1.5 du site de sun. En anglais...
    Mot clé = prin | Niveau = 2

  • Principe de substitution
    https://www.gaudry.be > Programmation > Bases de programmation
    [105] 03/01/2010 - Dernière modification le 26/10/2018 Le principe de substitution selon Barbara Liskov
    Mot clé = prin | Niveau = 2

  • Principes des fibres optiques
    https://www.gaudry.be > Les réseaux > Généralités réseau
    [106] 28/07/2003 - Dernière modification le 26/10/2018 Applications des lois de l’optique aux fibres
    Mot clé = prin | Niveau = 2

  • Printable
    https://www.gaudry.be > Programmation > API Java
    [107] 30/08/2006 - Dernière modification le 16/10/2019 java.awt.print.Printable Les API Java 1.5 du site de sun. En anglais...
    Mot clé = prin | Niveau = 2

  • PrinterAbortException
    https://www.gaudry.be > Programmation > API Java
    [108] 09/01/2010 - Dernière modification le 16/10/2019 java.awt.print.PrinterAbortException
    Mot clé = prin | Niveau = 2

  • PrinterAbortException
    https://www.gaudry.be > Programmation > API Java
    [109] 31/08/2006 - Dernière modification le 16/10/2019 java.awt.print.PrinterAbortException Les API Java 1.5 du site de sun. En anglais...
    Mot clé = prin | Niveau = 2

  • PrinterException
    https://www.gaudry.be > Programmation > API Java
    [110] 31/08/2006 - Dernière modification le 16/10/2019 java.awt.print.PrinterException Les API Java 1.5 du site de sun. En anglais...
    Mot clé = prin | Niveau = 2

  • PrinterGraphics
    https://www.gaudry.be > Programmation > API Java
    [111] 30/08/2006 - Dernière modification le 16/10/2019 java.awt.print.PrinterGraphics Les API Java 1.5 du site de sun. En anglais...
    Mot clé = prin | Niveau = 2

  • PrinterInfo
    https://www.gaudry.be > Programmation > API Java
    [112] 07/12/2006 - Dernière modification le 16/10/2019 javax.print.attribute.standard.PrinterInfo Les API Java 1.5 du site de sun. En anglais...
    Mot clé = prin | Niveau = 2

  • PrinterIOException
    https://www.gaudry.be > Programmation > API Java
    [113] 30/08/2006 - Dernière modification le 16/10/2019 java.awt.print.PrinterIOException Les API Java 1.5 du site de sun. En anglais...
    Mot clé = prin | Niveau = 2

  • PrinterIsAcceptingJobs
    https://www.gaudry.be > Programmation > API Java
    [114] 07/12/2006 - Dernière modification le 16/10/2019 javax.print.attribute.standard.PrinterIsAcceptingJobs Les API Java 1.5 du site de sun. En anglais...
    Mot clé = prin | Niveau = 2

  • PrinterJob
    https://www.gaudry.be > Programmation > API Java
    [115] 15/09/2006 - Dernière modification le 16/10/2019 java.awt.print.PrinterJob Les API Java 1.5 du site de sun. En anglais...
    Mot clé = prin | Niveau = 2

  • PrinterLocation
    https://www.gaudry.be > Programmation > API Java
    [116] 07/12/2006 - Dernière modification le 16/10/2019 javax.print.attribute.standard.PrinterLocation Les API Java 1.5 du site de sun. En anglais...
    Mot clé = prin | Niveau = 2

  • PrinterMakeAndModel
    https://www.gaudry.be > Programmation > API Java
    [117] 06/12/2006 - Dernière modification le 16/10/2019 javax.print.attribute.standard.PrinterMakeAndModel Les API Java 1.5 du site de sun. En anglais...
    Mot clé = prin | Niveau = 2

  • PrinterMessageFromOperator
    https://www.gaudry.be > Programmation > API Java
    [118] 07/12/2006 - Dernière modification le 16/10/2019 javax.print.attribute.standard.PrinterMessageFromOperator Les API Java 1.5 du site de sun. En anglais...
    Mot clé = prin | Niveau = 2

  • PrinterMoreInfo
    https://www.gaudry.be > Programmation > API Java
    [119] 07/12/2006 - Dernière modification le 16/10/2019 javax.print.attribute.standard.PrinterMoreInfo Les API Java 1.5 du site de sun. En anglais...
    Mot clé = prin | Niveau = 2

  • PrinterMoreInfoManufacturer
    https://www.gaudry.be > Programmation > API Java
    [120] 07/12/2006 - Dernière modification le 16/10/2019 javax.print.attribute.standard.PrinterMoreInfoManufacturer Les API Java 1.5 du site de sun. En anglais...
    Mot clé = prin | Niveau = 2

  • PrinterName
    https://www.gaudry.be > Programmation > API Java
    [121] 07/12/2006 - Dernière modification le 16/10/2019 javax.print.attribute.standard.PrinterName Les API Java 1.5 du site de sun. En anglais...
    Mot clé = prin | Niveau = 2

  • PrinterResolution
    https://www.gaudry.be > Programmation > API Java
    [122] 07/12/2006 - Dernière modification le 16/10/2019 javax.print.attribute.standard.PrinterResolution Les API Java 1.5 du site de sun. En anglais...
    Mot clé = prin | Niveau = 2

  • PrinterState
    https://www.gaudry.be > Programmation > API Java
    [123] 07/12/2006 - Dernière modification le 16/10/2019 javax.print.attribute.standard.PrinterState Les API Java 1.5 du site de sun. En anglais...
    Mot clé = prin | Niveau = 2

  • PrinterStateReason
    https://www.gaudry.be > Programmation > API Java
    [124] 16/09/2006 - Dernière modification le 16/10/2019 javax.print.attribute.standard.PrinterStateReason Les API Java 1.5 du site de sun. En anglais...
    Mot clé = prin | Niveau = 2

  • PrinterStateReasons
    https://www.gaudry.be > Programmation > API Java
    [125] 06/12/2006 - Dernière modification le 16/10/2019 javax.print.attribute.standard.PrinterStateReasons Les API Java 1.5 du site de sun. En anglais...
    Mot clé = prin | Niveau = 2

  • PrinterURI
    https://www.gaudry.be > Programmation > API Java
    [126] 06/12/2006 - Dernière modification le 16/10/2019 javax.print.attribute.standard.PrinterURI Les API Java 1.5 du site de sun. En anglais...
    Mot clé = prin | Niveau = 2

  • PrintEvent
    https://www.gaudry.be > Programmation > API Java
    [127] 31/08/2006 - Dernière modification le 16/10/2019 javax.print.event.PrintEvent Les API Java 1.5 du site de sun. En anglais...
    Mot clé = prin | Niveau = 2

  • PrintException
    https://www.gaudry.be > Programmation > API Java
    [128] 30/08/2006 - Dernière modification le 16/10/2019 javax.print.PrintException Les API Java 1.5 du site de sun. En anglais...
    Mot clé = prin | Niveau = 2

  • printf
    https://www.gaudry.be > Programmation > C & C++
    [129] 19/03/2002 - Dernière modification le 26/10/2018 La fonction printf en C
    Mot clé = prin | Niveau = 2

  • PrintJobAdapter
    https://www.gaudry.be > Programmation > API Java
    [130] 30/08/2006 - Dernière modification le 16/10/2019 javax.print.event.PrintJobAdapter Les API Java 1.5 du site de sun. En anglais...
    Mot clé = prin | Niveau = 2

  • PrintJobAttribute
    https://www.gaudry.be > Programmation > API Java
    [131] 10/01/2010 - Dernière modification le 16/10/2019 javax.print.attribute.PrintJobAttribute
    Mot clé = prin | Niveau = 2

  • PrintJobAttribute
    https://www.gaudry.be > Programmation > API Java
    [132] 01/09/2006 - Dernière modification le 16/10/2019 javax.print.attribute.PrintJobAttribute Les API Java 1.5 du site de sun. En anglais...
    Mot clé = prin | Niveau = 2

  • PrintJobAttributeEvent
    https://www.gaudry.be > Programmation > API Java
    [133] 01/09/2006 - Dernière modification le 16/10/2019 javax.print.event.PrintJobAttributeEvent Les API Java 1.5 du site de sun. En anglais...
    Mot clé = prin | Niveau = 2

  • PrintJobAttributeListener
    https://www.gaudry.be > Programmation > API Java
    [134] 07/12/2006 - Dernière modification le 16/10/2019 javax.print.event.PrintJobAttributeListener Les API Java 1.5 du site de sun. En anglais...
    Mot clé = prin | Niveau = 2

  • PrintJobAttributeSet
    https://www.gaudry.be > Programmation > API Java
    [135] 31/08/2006 - Dernière modification le 16/10/2019 javax.print.attribute.PrintJobAttributeSet Les API Java 1.5 du site de sun. En anglais...
    Mot clé = prin | Niveau = 2

  • PrintJobEvent
    https://www.gaudry.be > Programmation > API Java
    [136] 30/08/2006 - Dernière modification le 16/10/2019 javax.print.event.PrintJobEvent Les API Java 1.5 du site de sun. En anglais...
    Mot clé = prin | Niveau = 2

  • PrintJobListener
    https://www.gaudry.be > Programmation > API Java
    [137] 31/08/2006 - Dernière modification le 16/10/2019 javax.print.event.PrintJobListener Les API Java 1.5 du site de sun. En anglais...
    Mot clé = prin | Niveau = 2

  • PrintQuality
    https://www.gaudry.be > Programmation > API Java
    [138] 07/12/2006 - Dernière modification le 16/10/2019 javax.print.attribute.standard.PrintQuality Les API Java 1.5 du site de sun. En anglais...
    Mot clé = prin | Niveau = 2

  • PrintRequestAttribute
    https://www.gaudry.be > Programmation > API Java
    [139] 07/12/2006 - Dernière modification le 16/10/2019 javax.print.attribute.PrintRequestAttribute Les API Java 1.5 du site de sun. En anglais...
    Mot clé = prin | Niveau = 2

  • PrintRequestAttributeSet
    https://www.gaudry.be > Programmation > API Java
    [140] 07/12/2006 - Dernière modification le 16/10/2019 javax.print.attribute.PrintRequestAttributeSet Les API Java 1.5 du site de sun. En anglais...
    Mot clé = prin | Niveau = 2

  • PrintService
    https://www.gaudry.be > Programmation > API Java
    [141] 15/09/2006 - Dernière modification le 16/10/2019 javax.print.PrintService Les API Java 1.5 du site de sun. En anglais...
    Mot clé = prin | Niveau = 2

  • PrintServiceAttribute
    https://www.gaudry.be > Programmation > API Java
    [142] 06/12/2006 - Dernière modification le 16/10/2019 javax.print.attribute.PrintServiceAttribute Les API Java 1.5 du site de sun. En anglais...
    Mot clé = prin | Niveau = 2

  • PrintServiceAttributeEvent
    https://www.gaudry.be > Programmation > API Java
    [143] 06/12/2006 - Dernière modification le 16/10/2019 javax.print.event.PrintServiceAttributeEvent Les API Java 1.5 du site de sun. En anglais...
    Mot clé = prin | Niveau = 2

  • PrintServiceAttributeListener
    https://www.gaudry.be > Programmation > API Java
    [144] 07/12/2006 - Dernière modification le 16/10/2019 javax.print.event.PrintServiceAttributeListener Les API Java 1.5 du site de sun. En anglais...
    Mot clé = prin | Niveau = 2

  • PrintServiceAttributeSet
    https://www.gaudry.be > Programmation > API Java
    [145] 01/09/2006 - Dernière modification le 16/10/2019 javax.print.attribute.PrintServiceAttributeSet Les API Java 1.5 du site de sun. En anglais...
    Mot clé = prin | Niveau = 2

  • PrintServiceLookup
    https://www.gaudry.be > Programmation > API Java
    [146] 31/08/2006 - Dernière modification le 16/10/2019 javax.print.PrintServiceLookup Les API Java 1.5 du site de sun. En anglais...
    Mot clé = prin | Niveau = 2

  • PrintStream
    https://www.gaudry.be > Programmation > Java
    [147] 24/06/2005 - Dernière modification le 02/08/2019
    Mot clé = prin | Niveau = 2

  • QueuedJobCount
    https://www.gaudry.be > Programmation > API Java
    [148] 06/12/2006 - Dernière modification le 16/10/2019 javax.print.attribute.standard.QueuedJobCount Les API Java 1.5 du site de sun. En anglais...
    Mot clé = prin | Niveau = 2

  • ReferenceUriSchemesSupported
    https://www.gaudry.be > Programmation > API Java
    [149] 07/12/2006 - Dernière modification le 16/10/2019 javax.print.attribute.standard.ReferenceUriSchemesSupported Les API Java 1.5 du site de sun. En anglais...
    Mot clé = prin | Niveau = 2

  • RequestingUserName
    https://www.gaudry.be > Programmation > API Java
    [150] 07/12/2006 - Dernière modification le 16/10/2019 javax.print.attribute.standard.RequestingUserName Les API Java 1.5 du site de sun. En anglais...
    Mot clé = prin | Niveau = 2

  • ResolutionSyntax
    https://www.gaudry.be > Programmation > API Java
    [151] 31/08/2006 - Dernière modification le 16/10/2019 javax.print.attribute.ResolutionSyntax Les API Java 1.5 du site de sun. En anglais...
    Mot clé = prin | Niveau = 2

  • Satellites[principes]
    https://www.gaudry.be > Les réseaux > Généralités réseau
    [152] 17/04/2004 - Dernière modification le 26/10/2018
    Mot clé = prin | Niveau = 2

  • ServiceUI
    https://www.gaudry.be > Programmation > API Java
    [153] 28/08/2006 - Dernière modification le 16/10/2019 javax.print.ServiceUI Les API Java 1.5 du site de sun. En anglais...
    Mot clé = prin | Niveau = 2

  • ServiceUIFactory
    https://www.gaudry.be > Programmation > API Java
    [154] 30/08/2006 - Dernière modification le 16/10/2019 javax.print.ServiceUIFactory Les API Java 1.5 du site de sun. En anglais...
    Mot clé = prin | Niveau = 2

  • SetOfIntegerSyntax
    https://www.gaudry.be > Programmation > API Java
    [155] 01/09/2006 - Dernière modification le 16/10/2019 javax.print.attribute.SetOfIntegerSyntax Les API Java 1.5 du site de sun. En anglais...
    Mot clé = prin | Niveau = 2

  • Severity
    https://www.gaudry.be > Programmation > API Java
    [156] 01/09/2006 - Dernière modification le 16/10/2019 javax.print.attribute.standard.Severity Les API Java 1.5 du site de sun. En anglais...
    Mot clé = prin | Niveau = 2

  • SheetCollate
    https://www.gaudry.be > Programmation > API Java
    [157] 06/12/2006 - Dernière modification le 16/10/2019 javax.print.attribute.standard.SheetCollate Les API Java 1.5 du site de sun. En anglais...
    Mot clé = prin | Niveau = 2

  • Sides
    https://www.gaudry.be > Programmation > API Java
    [158] 31/08/2006 - Dernière modification le 16/10/2019 javax.print.attribute.standard.Sides Les API Java 1.5 du site de sun. En anglais...
    Mot clé = prin | Niveau = 2

  • SimpleDoc
    https://www.gaudry.be > Programmation > API Java
    [159] 29/08/2006 - Dernière modification le 16/10/2019 javax.print.SimpleDoc Les API Java 1.5 du site de sun. En anglais...
    Mot clé = prin | Niveau = 2

  • Size2DSyntax
    https://www.gaudry.be > Programmation > API Java
    [160] 30/08/2006 - Dernière modification le 16/10/2019 javax.print.attribute.Size2DSyntax Les API Java 1.5 du site de sun. En anglais...
    Mot clé = prin | Niveau = 2

  • Spring
    https://www.gaudry.be > Programmation > API Java
    [161] 29/08/2006 - Dernière modification le 16/10/2019 javax.swing.Spring Les API Java 1.5 du site de sun. En anglais...
    Mot clé = prin | Niveau = 2

  • SpringLayout
    https://www.gaudry.be > Programmation > API Java
    [162] 15/09/2006 - Dernière modification le 16/10/2019 javax.swing.SpringLayout Les API Java 1.5 du site de sun. En anglais...
    Mot clé = prin | Niveau = 2

  • SpringLayout.Constraints
    https://www.gaudry.be > Programmation > API Java
    [163] 30/08/2006 - Dernière modification le 16/10/2019 javax.swing.SpringLayout.Constraints Les API Java 1.5 du site de sun. En anglais...
    Mot clé = prin | Niveau = 2

  • StreamPrintService
    https://www.gaudry.be > Programmation > API Java
    [164] 31/08/2006 - Dernière modification le 16/10/2019 javax.print.StreamPrintService Les API Java 1.5 du site de sun. En anglais...
    Mot clé = prin | Niveau = 2

  • StreamPrintServiceFactory
    https://www.gaudry.be > Programmation > API Java
    [165] 31/08/2006 - Dernière modification le 16/10/2019 javax.print.StreamPrintServiceFactory Les API Java 1.5 du site de sun. En anglais...
    Mot clé = prin | Niveau = 2

  • SupportedValuesAttribute
    https://www.gaudry.be > Programmation > API Java
    [166] 06/12/2006 - Dernière modification le 16/10/2019 javax.print.attribute.SupportedValuesAttribute Les API Java 1.5 du site de sun. En anglais...
    Mot clé = prin | Niveau = 2

  • TextSyntax
    https://www.gaudry.be > Programmation > API Java
    [167] 31/08/2006 - Dernière modification le 16/10/2019 javax.print.attribute.TextSyntax Les API Java 1.5 du site de sun. En anglais...
    Mot clé = prin | Niveau = 2

  • Transformations
    https://www.gaudry.be > Généralités > SGBD
    [168] 10/01/2010 - Dernière modification le 26/10/2018 Catalogue des principales transformations de schémas
    Mot clé = prin | Niveau = 2

  • UnmodifiableSetException
    https://www.gaudry.be > Programmation > API Java
    [169] 06/12/2006 - Dernière modification le 16/10/2019 javax.print.attribute.UnmodifiableSetException Les API Java 1.5 du site de sun. En anglais...
    Mot clé = prin | Niveau = 2

  • URIException
    https://www.gaudry.be > Programmation > API Java
    [170] 29/08/2006 - Dernière modification le 16/10/2019 javax.print.URIException Les API Java 1.5 du site de sun. En anglais...
    Mot clé = prin | Niveau = 2

  • URIException
    https://www.gaudry.be > Programmation > API Java
    [171] 09/01/2010 - Dernière modification le 16/10/2019 javax.print.URIException
    Mot clé = prin | Niveau = 2

  • URISyntax
    https://www.gaudry.be > Programmation > API Java
    [172] 31/08/2006 - Dernière modification le 16/10/2019 javax.print.attribute.URISyntax Les API Java 1.5 du site de sun. En anglais...
    Mot clé = prin | Niveau = 2

  • Von Neuman
    https://www.gaudry.be > Programmation > Compilateur
    [173] 05/03/2005 - Dernière modification le 31/10/2018 L'architecture Von Neuman permet de comprendre les principes de base de l'architecture des ordinateurs modernes.
    Mot clé = acc | Niveau = 4

  • Langage machine
    https://www.gaudry.be > Programmation > Compilateur
    [174] 10/02/2004 - Dernière modification le 28/10/2018 "Langage machine" contre "micro instructions", principe du langage machine, Jeu d'instructions langage machine
    Mot clé = add | Niveau = 5

  • 3 photos en rapport avec alpha-romeo-giuletta-sprint
    https://www.gaudry.be > Photo > Galerie
    [175] 25/08/2019 - Dernière modification le 20/09/2019 Il est possible de consulter les photos selon le flux de la galerie, mais aussi selon certaines recherches, que ce soit par tags comme dans ce cas, ou selon les meta données des photos.
    Mot clé = alpha-romeo-giuletta-sprint | Niveau = 11

  • 2 photos en rapport avec printemp
    https://www.gaudry.be > Photo > Galerie
    [176] 13/09/2019 - Dernière modification le 30/09/2019 Il est possible de consulter les photos selon le flux de la galerie, mais aussi selon certaines recherches, que ce soit par tags comme dans ce cas, ou selon les meta données des photos.
    Mot clé = printemp | Niveau = 12

  • 2 photos en rapport avec printemps
    https://www.gaudry.be > Photo > Galerie
    [177] 12/09/2019 - Dernière modification le 29/09/2019 Il est possible de consulter les photos selon le flux de la galerie, mais aussi selon certaines recherches, que ce soit par tags comme dans ce cas, ou selon les meta données des photos.
    Mot clé = printemps | Niveau = 13

  • 1 photo en rapport avec springbank
    https://www.gaudry.be > Photo > Galerie
    [178] 12/09/2019 - Dernière modification le 29/09/2019 Il est possible de consulter les photos selon le flux de la galerie, mais aussi selon certaines recherches, que ce soit par tags comme dans ce cas, ou selon les meta données des photos.
    Mot clé = springbank | Niveau = 14

  • Garage Imperia - voiture abandonnée - arrière
    https://www.gaudry.be > Photo > Galerie
    [179] 27/08/2019 - Dernière modification le 21/09/2019 Imperia Impéria was a Belgian automobile manufactured from 1906 until 1948. Products of the Ateliers Piedboeuf of Liège, the first cars were designed by the German Paul Henze. These were fours of 3, 4.9, and 9.9 liters. /.../ Impéria produced a monobloc 12 hp (8.9 kW) in 1909; in 1910 the company merged with Springuel. The factory producing Impéria-Abadals from about 1916; in 1921, it built three ohc 5·6-liter straight-eights. These were quickly replaced by an ephemeral ohc 3-liter 32-valve four which was capable of going 90 mph (140 km/h). This was followed by an 1100 cc side-valve 11/22 hp four designed by Couchard, one of the first cars ever built with a sunroof. Its engine rotated counter-clockwise, and its transmission brake also served as a servo for those on the front wheels. In 1937 a six of 1624 cc appeared; this had been available in three-carburettor Super Sports form from 1930. Over the course of four years Impéria took over three other Belgian car manufacturers: Métallurgique (1927), Excelsior (1929), and Nagant (1931). From 1934 until the company folded it built mainly front-wheel-drive Adlers with Belgian-made coachwork. The company merged with Minerva in 1934, but they split in 1939. After 1948 Impéria assembled Adlers and Standard Vanguards under license. After Standard decided to set up a new factory in Belgium, the factory was left without work and had to close doors in 1957. In 1925, the company hired Louis de Monge as chief research engineer. Some of his work included torsion bar suspension and automatic transmissions. De Monge left in 1937 to join Ettore Bugatti for whom he would design the Bugatti 100P racer plane. In addition to its production in Belgium, Impéria made a number of cars in Great Britain; these were assembled at a factory in Maidenhead. Rooftop test track Around and on top of the factory buildings, there was a test track over 1km long. The track was built in 1928. The test drivers used the roads of the village, a road with a lot of bends. Speeding and high revving engines made the population mad and they were no longer willing to support the factory. The only solution was to build a test track within the factory and using the football field of the local football club. The ring started within the factory, then over the roof which gave a track of about one kilometre. Only Fiat had a similar track. This little test track became an attraction in the region. A little causeway allowed people to climb onto the nearside hill to watch the spectacle of car testing over the factories roofs. And now Now most of the buildings are occupied by a firm of construction, and a few sheds and batiments are so ruined that the roof risks to collapse. There are still two vehicles (under the dust and the building materials), among which one may be an Imperia model. From Wikipedia, the free encyclopedia.
    Mot clé = prin (titre ou description) | Niveau = 15

  • Usine Impéria, l'entrée moyenâgeuse
    https://www.gaudry.be > Photo > Galerie
    [180] 05/09/2019 - Dernière modification le 26/09/2019 Imperia Impéria was a Belgian automobile manufactured from 1906 until 1948. Products of the Ateliers Piedboeuf of Liège, the first cars were designed by the German Paul Henze. These were fours of 3, 4.9, and 9.9 liters. /.../ Impéria produced a monobloc 12 hp (8.9 kW) in 1909; in 1910 the company merged with Springuel. The factory producing Impéria-Abadals from about 1916; in 1921, it built three ohc 5·6-liter straight-eights. These were quickly replaced by an ephemeral ohc 3-liter 32-valve four which was capable of going 90 mph (140 km/h). This was followed by an 1100 cc side-valve 11/22 hp four designed by Couchard, one of the first cars ever built with a sunroof. Its engine rotated counter-clockwise, and its transmission brake also served as a servo for those on the front wheels. In 1937 a six of 1624 cc appeared; this had been available in three-carburettor Super Sports form from 1930. Over the course of four years Impéria took over three other Belgian car manufacturers: Métallurgique (1927), Excelsior (1929), and Nagant (1931). From 1934 until the company folded it built mainly front-wheel-drive Adlers with Belgian-made coachwork. The company merged with Minerva in 1934, but they split in 1939. After 1948 Impéria assembled Adlers and Standard Vanguards under license. After Standard decided to set up a new factory in Belgium, the factory was left without work and had to close doors in 1957. In 1925, the company hired Louis de Monge as chief research engineer. Some of his work included torsion bar suspension and automatic transmissions. De Monge left in 1937 to join Ettore Bugatti for whom he would design the Bugatti 100P racer plane. In addition to its production in Belgium, Impéria made a number of cars in Great Britain; these were assembled at a factory in Maidenhead. Rooftop test track Around and on top of the factory buildings, there was a test track over 1km long. The track was built in 1928. The test drivers used the roads of the village, a road with a lot of bends. Speeding and high revving engines made the population mad and they were no longer willing to support the factory. The only solution was to build a test track within the factory and using the football field of the local football club. The ring started within the factory, then over the roof which gave a track of about one kilometre. Only Fiat had a similar track. This little test track became an attraction in the region. A little causeway allowed people to climb onto the nearside hill to watch the spectacle of car testing over the factories roofs. And now Now most of the buildings are occupied by a firm of construction, and a few sheds and batiments are so ruined that the roof risks to collapse. There are still two vehicles (under the dust and the building materials), among which one may be an Imperia model. From Wikipedia, the free encyclopedia.
    Mot clé = prin (titre ou description) | Niveau = 16

  • Crime Scene: Barbie's murder
    https://www.gaudry.be > Photo > Galerie
    [181] 15/09/2019 - Dernière modification le 01/10/2019 A fairly straightforward case you might think. So did the police in 1991. Barbie was friendly with Blaine, an Australian surfer who worked part-time for her as gardener, during her split with Ken. The cause of death was multiple stab-wounds –18 in all – to the chest and abdomen (but as the head is not here, perhaps is it the real cause of death: Does she have long lived without a head like some other women?). The medical examiner estimated that it had taken the injured woman between 15 and 30 minutes to die after the initial assault. The time of death was not difficult to establish as Mrs. Barbie Handler had telephoned a friend at 11:48 am on that fateful Sunday but had failed to arrive at the Davis' at 1 pm (Jessie and Woody Davis are the Barbie's neighbours) According to the police who found the body, the door to the basement – the only means of entry or exit – had been barricaded by a collapsible bed and an iron bar, apparently placed there by the murdered woman to prevent the return of her assailant. On the inside of the door was the message Ken m'a tuer – Ken killed me – traced with a finger in the victim's blood, and further away the same message again, incomplete this time and scarcely legible: Ken m'a t.. . There was also a bloody hand-print. The blood was later confirmed to be Mrs. Barbie's.
    Mot clé = prin (titre ou description) | Niveau = 17

  • Rotaprint
    https://www.gaudry.be > Photo > Galerie
    [182] 04/10/2019 - Dernière modification le 10/10/2019
    Mot clé = prin (titre ou description) | Niveau = 18

  • Take nothing but pictures, leave nothing but footprints
    https://www.gaudry.be > Photo > Galerie
    [183] 11/11/2011 - Dernière modification le 17/09/2019
    Mot clé = prin (titre ou description) | Niveau = 19

  • Conveyer belt
    https://www.gaudry.be > Photo > Galerie
    [184] 27/01/2012 - Dernière modification le 08/10/2019 Production of 275,000 tons of stone per year. It is crushed and is mainly used in road works. The activity of the career of Trooz is seasonal because the stones are separated from the installations by the Vesdre and the passage is made to ford. It is therefore impossible to access the primary reservoir and facilities in case of flooding. La carrière de Forêt-Trooz appartient au moment de la prise de vue (2011) à la SA Gralex qui y exploite 275.000 tonnes de grès par an. Celui-ci est concassé et est principalement utilisé dans les travaux routiers. L’activité de la carrière de Trooz est saisonnière car le gisement est séparé des installations par la Vesdre et le passage se fait à gué. Il est donc impossible d’accéder au gisement et aux installations primaires en cas de crue.
    Mot clé = prin (titre ou description) | Niveau = 20

  • Blue valves
    https://www.gaudry.be > Photo > Galerie
    [185] 27/01/2012 - Dernière modification le 09/10/2019 Production of 275,000 tons of stone per year. It is crushed and is mainly used in road works. The activity of the career of Trooz is seasonal because the stones are separated from the installations by the Vesdre and the passage is made to ford. It is therefore impossible to access the primary reservoir and facilities in case of flooding. La carrière de Forêt-Trooz appartient au moment de la prise de vue (2011) à la SA Gralex qui y exploite 275.000 tonnes de grès par an. Celui-ci est concassé et est principalement utilisé dans les travaux routiers. L’activité de la carrière de Trooz est saisonnière car le gisement est séparé des installations par la Vesdre et le passage se fait à gué. Il est donc impossible d’accéder au gisement et aux installations primaires en cas de crue.
    Mot clé = prin (titre ou description) | Niveau = 21

  • Istanbul, Rüstem Paşa Camii
    https://www.gaudry.be > Photo > Galerie
    [186] 22/02/2012 - Dernière modification le 30/09/2019 The Rüstem Pasha Mosque (Turkish: ' Rüstempaşa Camii') is an Ottoman mosque located in Hasırcılar Çarşısı (Strawmat Weavers Market) in the Tahtakale neighborhood, of the Eminönü district of Istanbul, Turkey. History The Rüstem Pasha Mosque was designed by Ottoman imperial architect Mimar Sinan for Grand Vizier Damat Rüstem Pasha (husband of one of the daughters of Suleiman the Magnificent, Princess Mihrimah). Rüstem Pasha died in July 1561 and the mosque was built after his death from around 1561 until 1563. Architecture Exterior The mosque was built on a high terrace over a complex of vaulted shops, whose rents were intended to financially support the mosque complex. Narrow, twisting interior flights of steps in the corners give access to a spacious courtyard. The mosque has a double porch with five domed bays, from which projects a deep and low roof supported by a row of columns. Interior The Rüstem Pasha Mosque is famous for its large quantities of exquisite İznik tiles, set in a very wide variety of beautiful floral and geometric designs, which cover not only the façade of the porch but also the mihrab, minbar, walls, columns and on the façade of the porch outside. These tiles exhibit the early use of a tomato-red color that would become characteristic of İznik pottery. Some of the tiles, particularly those in a large panel under the portico to the left main entrance, are decorated with sage green and dark manganese purple that are characteristic of the earlier 'Damascus ware' coloring scheme. No other mosque in Istanbul makes such a lavish use of these tiles. The plan of the building is basically that of an octagon inscribed in a rectangle. The main dome rests on four semi-domes; not on the axes but in the diagonals of the building. The arches of the dome spring from four octagonal pillars— two on the north, two on the south— and from piers projecting from the east and west walls. To the north and south are galleries supported by pillars and by small marble columns between them. Source: Wikipedia, the free encyclopedia - version 25Feb2012 See also in my flickr albums: Hagia Sophia, Sultan Ahmed Mosque (Blue Mosque of Istanbul)
    Mot clé = prin (titre ou description) | Niveau = 22

  • Lost Alfa Romeo Giulietta Sprint Special
    https://www.gaudry.be > Photo > Galerie
    [187] 03/09/2019 - Dernière modification le 25/09/2019
    Mot clé = prin (titre ou description) | Niveau = 23

  • Lost Alfa Romeo Giulietta Sprint
    https://www.gaudry.be > Photo > Galerie
    [188] 11/09/2019 - Dernière modification le 29/09/2019
    Mot clé = prin (titre ou description) | Niveau = 24

  • Flûte, Prestant, ♫mion ♪rg ♩♭ale, Réunion Grd Org Rée
    https://www.gaudry.be > Photo > Galerie
    [189] 10/08/2019 - Dernière modification le 13/09/2019 Fourniture : Mixture composée d'octaves et de quintes. Elle est plutôt grave, et n'a généralement pas beaucoup de reprises. Grd O. Bourdon 8p et 16p : jeu au son très doux (pauvre en harmoniques). Le 16’ sonne une octave plus bas que le 8’.Les bourdons sont construits avec de tuyaux à bouche, larges (à embouchure de Flûte) et bouchés en haut. Viole de Gambe : La Viole de Gambe, ou simplement Gambe est apparue suite à la constatation que si on rend un tuyau très étroit, le son prend une couleur ressemblant aux cordes frottées. Ce type de jeu a aussi un autre intérêt non négligeable : il a une attaque très particulière, ressemblant à un coup d'archet. Certaines Gambes, surtout dans les graves, n'ont pour ambition que d'ajouter ce caractère au son dans les basses. Montre : jeu de base de l'orgue. Il est constitué de tuyaux à bouche, ouverts en haut, posés en façade du buffet. Il donne par son attaque claire et franche une lisibilité particulière à la polyphonie. Flûte : jeu au son doux (assez pauvre en harmoniques donc avec une fondamentale particulièrement affirmée), de taille large, avec une bouche plus haute qu'un Principal. La Flûte 4' est une octave plus aigu que le 8’. Prestant : de taille moyenne comme le “Montre”, aussi nommé “Octav” ou “Choralbass”, en 4’ il sonne à l’octave aiguë.
    Mot clé = prin (titre ou description) | Niveau = 25

  • Viole de Gambe, Montre, Bourdon
    https://www.gaudry.be > Photo > Galerie
    [190] 12/09/2019 - Dernière modification le 29/09/2019 Fourniture : Mixture composée d'octaves et de quintes. Elle est plutôt grave, et n'a généralement pas beaucoup de reprises. Grd O. Bourdon 8p et 16p : jeu au son très doux (pauvre en harmoniques). Le 16’ sonne une octave plus bas que le 8’.Les bourdons sont construits avec de tuyaux à bouche, larges (à embouchure de Flûte) et bouchés en haut. Viole de Gambe : La Viole de Gambe, ou simplement Gambe est apparue suite à la constatation que si on rend un tuyau très étroit, le son prend une couleur ressemblant aux cordes frottées. Ce type de jeu a aussi un autre intérêt non négligeable : il a une attaque très particulière, ressemblant à un coup d'archet. Certaines Gambes, surtout dans les graves, n'ont pour ambition que d'ajouter ce caractère au son dans les basses. Montre : jeu de base de l'orgue. Il est constitué de tuyaux à bouche, ouverts en haut, posés en façade du buffet. Il donne par son attaque claire et franche une lisibilité particulière à la polyphonie. Flûte : jeu au son doux (assez pauvre en harmoniques donc avec une fondamentale particulièrement affirmée), de taille large, avec une bouche plus haute qu'un Principal. La Flûte 4' est une octave plus aigu que le 8’. Prestant : de taille moyenne comme le “Montre”, aussi nommé “Octav” ou “Choralbass”, en 4’ il sonne à l’octave aiguë.
    Mot clé = prin (titre ou description) | Niveau = 26

  • Premières fleurs de printemps
    https://www.gaudry.be > Photo > Galerie
    [191] 01/04/2012 - Dernière modification le 30/09/2019 Payîzèdje dèl province di Lîdje ! Li Walonerèye.
    Mot clé = prin (titre ou description) | Niveau = 27

  • John Cockerill's tribute
    https://www.gaudry.be > Photo > Galerie
    [192] 19/09/2019 - Dernière modification le 03/10/2019 John Cockerill (3 August 1790 – 9 June 1840) was a British born entrepreneur. He was born at Haslingden, Lancashire, England, and was brought by his father William Cockerill to Belgium where he continued the family tradition of building wool processing machinery, and founded an ironworks, and mechanical engineering company John Cockerill & Cie. (English: John Cockerill & Company) Biography John Cockerill was born in Haslingden, Lancashire. At the age of twelve he was brought to Verviers, Belgium by his father William Cockerill who had made a success as a machine builder there; in 1807, aged 17, he and his brother Charles James took the management of a factory in Liege. His father William retired in 1813 leaving the management of his business to his sons. In September 1813 he married Jeanne Frédérique Pastor, the same day her sister Caroline married Charles James Cockerill. After the victory over Napoleon at the Battle of Waterloo in 1815, the Prussian Minister of Finance, Peter Beuth invited the Cockerill brothers to set up a woollens factory in Berlin. In 1814 the brothers bought the former palace of the Prince Bishops of Liege at Seraing, the chateaux became the headquarters, and the ground behind the factory site (founded 1817); it was to become a vertically integrated iron foundry and machine manufacturing factory. William I of the Netherlands was joint owner of the plant. The machine manufacturing plant was added in 1819, and in 1826 (begun 1823) a coke fired blast furnace. By 1840 the plant had sixteen steam engines of total power 900 hp (670 kW) in continual work, and employed 3000 persons. In 1823 his brother Charles James retired,[9] having been bought out by John in 1822. After the Belgian Revolution of 1830 the new Kingdom of Belgium claimed the property of William I, and in 1835 John Cockerill made himself the sole owner of the works. He also was a founder of the Bank de Belgique, in 1835. During John Cockerill's lifetime, the factories produced not only spinning engines and steel, but steam engines (including air-blowers, traction engines, and engines for ships); in 1835 Belgiums first steam locomotive Le Belge was made. He also had interests in collierys and mines, as well as factories producing cloth, linen and paper. In 1838/9 military tensions between Belgium and the Netherlands caused a rush on the banks for hard currency; as a result of the crisis John Cockerill's company became bankrupt. With debts of 26 million francs on assets of 15 million, he travelled to St. Petersburg to make arrangements with Nicholas I of Russia with the hope of raising funds. On his return he contracted typhoid and died in Warsaw on 19 June 1840, leaving no heirs. From Wikipedia, the free encyclopedia
    Mot clé = prin (titre ou description) | Niveau = 28

  • Coprinus comatus
    https://www.gaudry.be > Photo > Galerie
    [193] 23/08/2012 - Dernière modification le 07/10/2019
    Mot clé = prin (titre ou description) | Niveau = 29

  • When you're born in the gutter you end up in the port
    https://www.gaudry.be > Photo > Galerie
    [194] 21/08/2019 - Dernière modification le 18/09/2019 Once upon a time there was an inventor so gifted that he could create life. A truly remarkable man. Since he had no wife or children he decided to create them in his laboratory. He started with wife and fas into the most beautiful princess in the world. Alas, a wicked genetic fairy cast a spell on the inventor so much so that the princess was only knee height or less. He then cloned six children in his own image, faithful, hardworking. They were so alike no one could tell them apart. But fate tricked him again, giving them all sleeping sickness. Craving someone to talk to he grew in a fish-tank a poor migraine-ridden brain. And then at last he created his masterpiece more intelligent then the most intelligent man on Earth. L'oncle Irvin: But alas the inventor made a serious mistake. While his creation was intelligent he never ever had a dream. You can't image how his sadness made him quickly he grow old. The City of Lost Children
    Mot clé = prin (titre ou description) | Niveau = 30

  • Olne autrefois 2013, wildemann
    https://www.gaudry.be > Photo > Galerie
    [195] 30/06/2013 - Dernière modification le 30/09/2019 Le wildemann Le wildemann est un personnage folklorique typique de l'Allemagne centrale, associé au renouveau saisonnier. Il n'est pas exclu que cette figure folklorique soit pertinente pour Olne, mais a priori il pourrait s'agir d'une simple reproduction d'une illustration -ou d'un souvenir touristique- sans grand rapport avec l'identité d'Olne. L'important ici est de se souvenir que les entités culturelles ne sont pas des "Memes" à fondement naturaliste, mais qu'il faut les comprendre dans un système culturel local. Il serait intéressant de comprendre ce que les bonshommes de buis nous révèlent de la structure sociale. A l'exposition de Hanovre -près de la patrie du Wildemann- en 2000, le pavillon du WWF en offrait une interprétation écologique : L'Homme Vert Le "Green Man" ("feuillu" en fr.) est un autre symbole folklorique du renouveau printanier. C'est plutôt un personnage attaché aux champs et aux cultures qu'aux espaces sauvages. Il trouve de nombreuses incarnations locales qui vont de Cernunnos à Peter Pan. Et le Père Noel et Robin des Bois en sont d'autres figurations. Dans les campagnes anglaises, Jack-in-the-Green, le Roi de Mai est un personnage disposant de pouvoirs de fertilité et de régénération. Source: Identité Olnoise - Olne page 27
    Mot clé = prin (titre ou description) | Niveau = 31

  • Liège, impasse Au Péri
    https://www.gaudry.be > Photo > Galerie
    [196] 17/07/2013 - Dernière modification le 03/10/2019 La rue "au Péri" permet de rejoindre la citadelle par un escalier qui débute rue Pierreuse. Cette photo est prise depuis l'entrée de la première impasse étroite à gauche en montant vers la citadelle. Historique Lorsque, aux environs de l'an mille, Notger, le premier prince-évêque de Liège, fait bâtir la première enceinte fortifiée de la ville, les pierres sont extraites de carrières ouvertes le long de l'actuelle rue Pierreuse et plus particulièrement Au Péri. Jusqu'au XIXe siècle, après être bordée de quelques habitations jusqu'au pied de l'escalier — qui n'existait pas en tant que tel auparavant — , ce n'est plus qu'une tchèråvôye (« voie pour charrettes » en wallon) de desserve pour les vignoblesnote 1 et les vergers des différents ordres religieux installés au pied des Coteaux de la Citadelle jusqu'à rejoindre cette citadelle. Avec la révolution industrielle apparue pendant la seconde moitié du XIXe siècle et surtout grâce à la réalisation de la Montagne de Bueren en 1880, la rue se couvre de petites maisons pour ouvriers. Source : Wikipedia
    Mot clé = prin (titre ou description) | Niveau = 32

  • Liège, les potagers des coteaux
    https://www.gaudry.be > Photo > Galerie
    [197] 17/07/2013 - Dernière modification le 29/09/2019 Le site désigné sous l'appellation des Coteaux de la Citadelle est sans nul doute le plus remarquable espace vert de la ville de Liège. S'étendant sur plus de 40 hectares, depuis Favechamps à l'ouest, jusqu'à l'ancien charbonnage du Bâneux, à l'est, il occupe principalement le versant sud d'une colline escarpée qui domine la rive gauche de la vallée de la Meuse. Ce vaste ensemble quasi continu de bois, de prairies, de vergers, de jardins, d'anciennes terrasses et murailles, de friches et de potagers recèle de nombreuses richesses archéologiques, historiques, architecturales et scientifiques dont la découverte est rendue possible grâce à l'aménagement d'un réseau dense de sentiers et de chemins publics. Bien que soumis à d'intenses pressions anthropiques, le lieu sert de refuge à une flore et une faune très diversifiées. Une partie des Coteaux de la Citadelle est classée comme site. Source: biodiversite.wallonie.be
    Mot clé = prin (titre ou description) | Niveau = 33

  • Kiskirálylány
    https://www.gaudry.be > Photo > Galerie
    [198] 03/08/2013 - Dernière modification le 07/10/2019 The original 50 cm statuette of the Little Princess (Kiskirálylány) statue sitting on the railings of the Danube promenade in Budapest, Hungary was created by László Marton (1925-2008) Munkácsy- and Kossuth Prize-winning sculptor in 1972. The artist was inspired by his eldest daughter born from his first marriage. She often played in the Tabán wearing a princess costume and a crown made out of newspaper by her father, and at home as well, pretending her bathrobes were a mantle. This image prompted her father, the artist in the creation of this little statue. László Marton writes: " Évike born from my first marriage, at the age of 5, was playing in a little princess costume in the Tabán playground. When I saw it, I immediately had the subject matter. Titled "Little Princess" I sculpted it as well. It was placed in an elegant location on the Danube promenade. Became a symbol of Budapest." "I modeled it after my own daughter - says László Marton in his studio (2007) - she was maybe six years old and playing in the garden. She dressed as a princess: laid a bathrobe on her shoulders and put a crown on her head. I managed to capture this moment and immediately felt that this was a successful work of art. Years later, the capital requested a statue from me. I immediately thought of the "Little Princess" and luckily we managed to find the place where the statue feels good." A larger size copy of this statue was placed on the Danube promenade in 1990, and a second copy in Tapolca, the artist's hometown. A copy of the same statue stands in Japan too - donated by the artist - in front of the Tokyo Metropolitan Art Space cultural center's concert hall. The original statuette (1972) is owned by Hungarian National Gallery. Source: Wikipedia The picture is very badly framed. I wished to have the statue to the left of the image and the Buda Castle on the right. This would have further expanded in the direction of the gaze of the statue, but I had to right a very large group of tourists who had decided to camp on site and jen did not have time to wait for them to leave .
    Mot clé = prin (titre ou description) | Niveau = 34

  • Gellért gyógyfürdő
    https://www.gaudry.be > Photo > Galerie
    [199] 04/08/2013 - Dernière modification le 04/10/2019 Gellért Baths Part of the famous Hotel Gellért in Buda, the Gellért Thermal Baths and Swimming Pool (also known as the Gellért Baths or in Hungarian as the Gellért fürdő) is a bath complex in Budapest, Hungary. History The bath complex was built between 1912 and 1918 in the (Secession) Art Nouveau style. It was damaged during World War II, but then rebuilt. References to healing waters in this location are found from as early as the 13th century. A hospital was located on this site during the Middle Ages. During the reign of the Ottoman Empire, baths were also built on this particular site. The "magical healing spring" used the Turkish during the 16th and 17th centuries. The bath was called Sárosfürdő ("muddy” bath), because the mineral mud settled at the bottom of pools.
    Mot clé = prin (titre ou description) | Niveau = 35

  • Széchenyi thermal bath seen from the city park
    https://www.gaudry.be > Photo > Galerie
    [200] 05/08/2013 - Dernière modification le 21/09/2019 Széchenyi thermal bath The Széchenyi Medicinal Bath in Budapest (IPA: [seːtʃeːɲi], Hungarian: Széchenyi-gyógyfürdő) is the largest medicinal bath in Europe. Its water is supplied by two thermal springs, their temperature is 74 °C (165 °F) and 77 °C (171 °F), respectively. Components of the thermal water include sulphate, calcium, magnesium, bicarbonate and a significant amount of fluoride acid and metaboric acid. Medical indications are on degenerative joint illnesses, chronic and sub-acute joint inflammations, as well as orthopaedic and traumatological post-treatments. History The bath can be found in the City Park, and was built in 1913 in Neo-baroque style to the design of Győző Czigler. The construction of the bath began on 7 May 1909. Designed by architect Eugene Schmitterer, The bath, named in the news as the Artesian spa, opened on 16 June 1913. The name of bath had been Széchenyi spa. The pool construction cost approximately 3.9 million Austro-Hungarian korona. The built-up area was 6,220 square meter. The attendance of spa was in excess of 200,000 people in 1913. (This number was already 890,507 in 1919). At that time it had private baths, separate men and women steam-bath sections, and different men / women "public baths". The complex was expanded in 1927, and it still has 3 outdoor and 15 indoor pools. After its expansion, the thermal artesian well could not fulfill its purpose, so a new well was drilled. The second thermal spring was found in 1938. The depth of the thermal spring is 1256m, the temperature is 77 °C and it supplies 6.000.000 litres (1 585 032 US gallons) of hot water daily. Between 1999 and 2009 the full reformation of the Széchenyi thermal bath took place within the confines of a blanket reconstruction. Main swimming and thermal sections are possible to visit mixed. The bath was named after István Széchenyi. Units In the baths there are pools of varying temperature. The outdoor pools (swimming pool, adventure pool and thermal sitting pool) are 27- 38°C. The swimming pool's depth is 0.8 - 1.7 m. The adventure pool's depth is 0.8 m. Guests can use the water streaming, whirlpool and massaging water beamand. The indoor pools are 27°C. The complex also includes saunas and steam. Massage services are available. Source: Wikipedia
    Mot clé = prin (titre ou description) | Niveau = 36

  • Széchenyi thermal bath, the coupole
    https://www.gaudry.be > Photo > Galerie
    [201] 05/08/2013 - Dernière modification le 27/09/2019 Széchenyi thermal bath The Széchenyi Medicinal Bath in Budapest (IPA: [seːtʃeːɲi], Hungarian: Széchenyi-gyógyfürdő) is the largest medicinal bath in Europe. Its water is supplied by two thermal springs, their temperature is 74 °C (165 °F) and 77 °C (171 °F), respectively. Components of the thermal water include sulphate, calcium, magnesium, bicarbonate and a significant amount of fluoride acid and metaboric acid. Medical indications are on degenerative joint illnesses, chronic and sub-acute joint inflammations, as well as orthopaedic and traumatological post-treatments. History The bath can be found in the City Park, and was built in 1913 in Neo-baroque style to the design of Győző Czigler. The construction of the bath began on 7 May 1909. Designed by architect Eugene Schmitterer, The bath, named in the news as the Artesian spa, opened on 16 June 1913. The name of bath had been Széchenyi spa. The pool construction cost approximately 3.9 million Austro-Hungarian korona. The built-up area was 6,220 square meter. The attendance of spa was in excess of 200,000 people in 1913. (This number was already 890,507 in 1919). At that time it had private baths, separate men and women steam-bath sections, and different men / women "public baths". The complex was expanded in 1927, and it still has 3 outdoor and 15 indoor pools. After its expansion, the thermal artesian well could not fulfill its purpose, so a new well was drilled. The second thermal spring was found in 1938. The depth of the thermal spring is 1256m, the temperature is 77 °C and it supplies 6.000.000 litres (1 585 032 US gallons) of hot water daily. Between 1999 and 2009 the full reformation of the Széchenyi thermal bath took place within the confines of a blanket reconstruction. Main swimming and thermal sections are possible to visit mixed. The bath was named after István Széchenyi. Units In the baths there are pools of varying temperature. The outdoor pools (swimming pool, adventure pool and thermal sitting pool) are 27- 38°C. The swimming pool's depth is 0.8 - 1.7 m. The adventure pool's depth is 0.8 m. Guests can use the water streaming, whirlpool and massaging water beamand. The indoor pools are 27°C. The complex also includes saunas and steam. Massage services are available. Source: Wikipedia
    Mot clé = prin (titre ou description) | Niveau = 37

  • Széchenyi Thermal Bath and Swimming Pool
    https://www.gaudry.be > Photo > Galerie
    [202] 05/08/2013 - Dernière modification le 24/09/2019 Széchenyi thermal bath The Széchenyi Medicinal Bath in Budapest (IPA: [seːtʃeːɲi], Hungarian: Széchenyi-gyógyfürdő) is the largest medicinal bath in Europe. Its water is supplied by two thermal springs, their temperature is 74 °C (165 °F) and 77 °C (171 °F), respectively. Components of the thermal water include sulphate, calcium, magnesium, bicarbonate and a significant amount of fluoride acid and metaboric acid. Medical indications are on degenerative joint illnesses, chronic and sub-acute joint inflammations, as well as orthopaedic and traumatological post-treatments. History The bath can be found in the City Park, and was built in 1913 in Neo-baroque style to the design of Győző Czigler. The construction of the bath began on 7 May 1909. Designed by architect Eugene Schmitterer, The bath, named in the news as the Artesian spa, opened on 16 June 1913. The name of bath had been Széchenyi spa. The pool construction cost approximately 3.9 million Austro-Hungarian korona. The built-up area was 6,220 square meter. The attendance of spa was in excess of 200,000 people in 1913. (This number was already 890,507 in 1919). At that time it had private baths, separate men and women steam-bath sections, and different men / women "public baths". The complex was expanded in 1927, and it still has 3 outdoor and 15 indoor pools. After its expansion, the thermal artesian well could not fulfill its purpose, so a new well was drilled. The second thermal spring was found in 1938. The depth of the thermal spring is 1256m, the temperature is 77 °C and it supplies 6.000.000 litres (1 585 032 US gallons) of hot water daily. Between 1999 and 2009 the full reformation of the Széchenyi thermal bath took place within the confines of a blanket reconstruction. Main swimming and thermal sections are possible to visit mixed. The bath was named after István Széchenyi. Units In the baths there are pools of varying temperature. The outdoor pools (swimming pool, adventure pool and thermal sitting pool) are 27- 38°C. The swimming pool's depth is 0.8 - 1.7 m. The adventure pool's depth is 0.8 m. Guests can use the water streaming, whirlpool and massaging water beamand. The indoor pools are 27°C. The complex also includes saunas and steam. Massage services are available. Source: Wikipedia
    Mot clé = prin (titre ou description) | Niveau = 38

  • Rencontre
    https://www.gaudry.be > Photo > Galerie
    [203] 31/08/2013 - Dernière modification le 10/10/2019 le renard: On ne peut connaître vraiment Que les choses que l'on apprivoise Mais si les hommes n'ont plus de temps De s'attarder quand ils se croisent Ils cherchent des choses toutes faites Mais il n'y a pas de marchands d'amis Qui vendent de l'amitié toute prête Alors les hommes n'ont plus d'amis .../... le Petit Prince : - Que faut-il faire ? le renard : - Il faut être patient. Tu t'assoiras d'abord un peu loin de moi, je te regarderai du coin de l'oeil... le Petit Prince : - Et... le renard : - Et tu ne diras rien. le Petit Prince : - Oh... le renard : - Le langage est source de malentendus. Mais, chaque jour, tu pourras t'asseoir un peu plus près. Le Petit Prince de Antoine de Saint-Exupéry
    Mot clé = prin (titre ou description) | Niveau = 39

  • Rencontre
    https://www.gaudry.be > Photo > Galerie
    [204] 31/08/2013 - Dernière modification le 10/10/2019 le renard: On ne peut connaître vraiment Que les choses que l'on apprivoise Mais si les hommes n'ont plus de temps De s'attarder quand ils se croisent Ils cherchent des choses toutes faites Mais il n'y a pas de marchands d'amis Qui vendent de l'amitié toute prête Alors les hommes n'ont plus d'amis .../... le Petit Prince : - Que faut-il faire ? le renard : - Il faut être patient. Tu t'assoiras d'abord un peu loin de moi, je te regarderai du coin de l'oeil... le Petit Prince : - Et... le renard : - Et tu ne diras rien. le Petit Prince : - Oh... le renard : - Le langage est source de malentendus. Mais, chaque jour, tu pourras t'asseoir un peu plus près. Le Petit Prince de Antoine de Saint-Exupéry
    Mot clé = prin (titre ou description) | Niveau = 40

  • Eindhoven glow 2013 - Ivo Schoofs
    https://www.gaudry.be > Photo > Galerie
    [205] 16/11/2013 - Dernière modification le 28/09/2019 Large Pendulum Wave GLOW - International Forum of Light in Art and Architecture Eindhoven 2013 - 8th Edition - 'Urban Playground' From November, 9th to 16th 2013, the city center of Eindhoven turns again into a forum of interventions, installations, performances and events based on the phenomena of artificial light. Artist: Ivo Schoofs Location: Stationsplein About the project: Think maths and physics are boring? The Large Pendulum Wave proves the opposite! This installation – almost seven metres high – is proof that mathematical and physical principles are able to generate superbly lyrical images. Large Pendulum Wave consists of a frame to which fifteen pendulums are attached, each culminating in an illuminated sphere. The pendulums are of different lengths, generating random patterns. Continuous waves become groups of pendulums ‘dancing’ at different tempos, which eventually descend into an apparent chaos. A little later, and the spheres suddenly seem to resume an orderly, harmonious pattern. Not only the movement of the spheres, but the colour of their light, changes with an extraordinary sequencing. Together, the movements offer a dazzling spectacle. Ivo Schoofs and his team aim to bring science closer to the general public, with installations based on familiar phenomena and that are a delight to the eye. Source: gloweindhoven
    Mot clé = prin (titre ou description) | Niveau = 41

  • Eindhoven glow 2013 - Luminauten (v2)
    https://www.gaudry.be > Photo > Galerie
    [206] 16/11/2013 - Dernière modification le 26/09/2019 Water Lily Nation GLOW - International Forum of Light in Art and Architecture Eindhoven 2013 - 8th Edition - 'Urban Playground' From November, 9th to 16th 2013, the city center of Eindhoven turns again into a forum of interventions, installations, performances and events based on the phenomena of artificial light. Artist: Luminauten Location: Gracht Dommelstraat About the project: A sea of flowers, luminous water lilies of smaller clusters gathering about larger ones, fills the canal along the Dommelstraat. At their centre floats a giant flower, a floral queen reigning over her entourage. When all is tranquil, the water lilies gradually change colour and the larger flowers give off glimmers of light. The flowers react to each other, and seem to communicate. If the peace of the water lilies is disturbed by a camera flash, the flowers react quite violently. The larger specimens blink brightly, as if to protect the colony. The smaller water lilies retreat into the darkness to recover their composure, after which they reappear. Water Lily Nation hammers home the point that the camera cannot register everything. If you want to observe the ‘natural’ behaviour of these aquatic flowers, you need to be patient, watch closely, and imprint them on your memory. Source: gloweindhoven
    Mot clé = prin (titre ou description) | Niveau = 42

  • Eindhoven glow 2013 - Luminauten (v1)
    https://www.gaudry.be > Photo > Galerie
    [207] 16/11/2013 - Dernière modification le 26/09/2019 Water Lily Nation GLOW - International Forum of Light in Art and Architecture Eindhoven 2013 - 8th Edition - 'Urban Playground' From November, 9th to 16th 2013, the city center of Eindhoven turns again into a forum of interventions, installations, performances and events based on the phenomena of artificial light. Artist: Luminauten Location: Gracht Dommelstraat About the project: A sea of flowers, luminous water lilies of smaller clusters gathering about larger ones, fills the canal along the Dommelstraat. At their centre floats a giant flower, a floral queen reigning over her entourage. When all is tranquil, the water lilies gradually change colour and the larger flowers give off glimmers of light. The flowers react to each other, and seem to communicate. If the peace of the water lilies is disturbed by a camera flash, the flowers react quite violently. The larger specimens blink brightly, as if to protect the colony. The smaller water lilies retreat into the darkness to recover their composure, after which they reappear. Water Lily Nation hammers home the point that the camera cannot register everything. If you want to observe the ‘natural’ behaviour of these aquatic flowers, you need to be patient, watch closely, and imprint them on your memory. Source: gloweindhoven
    Mot clé = prin (titre ou description) | Niveau = 43

  • Printemps
    https://www.gaudry.be > Photo > Galerie
    [208] 02/03/2014 - Dernière modification le 10/10/2019
    Mot clé = prin (titre ou description) | Niveau = 44

  • Ma princesse
    https://www.gaudry.be > Photo > Galerie
    [209] 03/05/2014 - Dernière modification le 09/10/2019
    Mot clé = prin (titre ou description) | Niveau = 45

  • Ne grandis pas trop vite ma princesse...
    https://www.gaudry.be > Photo > Galerie
    [210] 02/09/2014 - Dernière modification le 25/09/2019
    Mot clé = prin (titre ou description) | Niveau = 46

  • AGFA CLACK
    https://www.gaudry.be > Photo > Galerie
    [211] 03/10/2019 - Dernière modification le 10/10/2019 The Agfa Clack is a box camera produced by Agfa from 1954 to 1965. It was sold in North America as the Agfa Weekender. It is a simple camera which was aimed at the mass market. About 1.65 million were produced, more than all other Agfa box camera models combined. It uses 120 film, creating large 6x9 negatives that were usually contact printed (transferred directly from the negative onto photographic paper without enlarging). It has only one shutter speed, and, depending on model, either a single f/11 f-stop or a choice of two. Source: Wikipedia
    Mot clé = prin (titre ou description) | Niveau = 47

  • Serpolet
    https://www.gaudry.be > Photo > Galerie
    [212] 04/07/2015 - Dernière modification le 11/10/2019 Le serpolet (Thymus serpyllum) ou thym serpolet est un sous-arbrisseau de la famille des Lamiacées appartenant au genre Thymus. Description C'est une plante aromatique basse, d'environ 10 cm de hauteur, et s'étendant jusqu'à 50 cm de largeur ; elle est tapissante, aux tiges radicantes aux nœuds, aux très petites feuilles opposées ovales ou lancéolées, aux courtes hampes florales dressées. De juin à septembre, son feuillage aromatique vert à reflets pourprés sous le soleil disparaît littéralement sous une nuée de petites fleurs bleues groupées en capitules terminaux, plus carminés dans la variété Coccineus. Après la floraison, (juin à octobre) viennent les fruits formés de quatre petits akènes. C'est une plante des zones ensoleillées, broussailles, prés secs, rochers, dunes, jusqu'à 3 000 m d'altitude. Culture C'est une plante tapissante, au feuillage persistant qui résiste au gel jusqu'à -20 °C. Elle ne doit pas être plantée dans une terre trop riche car c'est dans les sols maigres et secs qu'elle donne le meilleur d'elle-même et répand alors des senteurs de garrigue. Quant à sa multiplication, elle se fait par division des touffes au printemps ou par bouturage estival. Propriétés médicinales Le serpolet est antiseptique et il a des propriétés anti-virales. Il est aussi stomachique, expectorant et antispasmodique. En aromate ou en infusion, c'est un désinfectant des voies digestives souvent utilisé associé au romarin et à la sauge. Il soulage les digestions difficiles. L'infusion de serpolet s'utilisait en bain de bouche en cas d'inflammation des gencives et en gargarisme en cas d'irritation de la gorge ou d'angine. Mais surtout le serpolet ou des préparations contenant les divers thyms s'utilisent en fumigation pour traiter les rhinites et les sinusites. Source : Wikipedia
    Mot clé = prin (titre ou description) | Niveau = 48

  • Venkat Subramaniam - humour in java8
    https://www.gaudry.be > Photo > Galerie
    [213] 10/11/2015 - Dernière modification le 27/09/2019 How to quickly understand the principles, while defending the public with an amazing humor and a very good management of time, public, and progressive explanations.
    Mot clé = prin (titre ou description) | Niveau = 49

  • L'hirondelle ne fait pas le printemps, mais le chameau fait le désert.
    https://www.gaudry.be > Photo > Galerie
    [214] 06/09/2017 - Dernière modification le 09/09/2019
    Mot clé = prin (titre ou description) | Niveau = 50

  • Eindhoven glow 2017_11_18_224514
    https://www.gaudry.be > Photo > Galerie
    [215] 18/11/2017 - Dernière modification le 29/09/2019 ‘Bilder und Klänge erzählen Geschichten...’ Stefan Keim, culture journalist. GLOWING is an urban light and sound installation that plays with all the senses. The festival route leads through the Expeditiestraat and in doing so through an urban-industrial layout of streets. Both the special atmosphere and the architectural character of the Expeditiestraat, divided into three by the crossbeams, defines the spatial appearance of the scene. The sun, as the origin of life. Fire, as the source of warmth and culture. These two-strong emotional and associative basic principles form the conceptual approach for this production. The public become one with the entire scene in this spectacle, that stirs all the senses and provides a physical explanation of art and nature. The audience transverse a kind of tunnel, one side of which is covered with black molton, and provides a view of a fiery scene. All the walls form a kind of sea of flames. This fire has no beginning and no end, solely infinitely glowing flames, acoustically supported by music with subsonic effects. Source: www.gloweindhoven.nl
    Mot clé = prin (titre ou description) | Niveau = 51

  • Cimetière de Muna (Yucatan - MEX) - allée principale
    https://www.gaudry.be > Photo > Galerie
    [216] 19/07/2019 - Dernière modification le 18/09/2019
    Mot clé = prin (titre ou description) | Niveau = 52

46 articles

Table des matières Haut

Document créé le 13/03/2010, dernière modification le 26/09/2019
Source du document imprimé : https://www.gaudry.be/tagcloud-rf-prin.html

L'infobrol est un site personnel dont le contenu n'engage que moi. Le texte est mis à disposition sous licence CreativeCommons(BY-NC-SA). Plus d'info sur les conditions d'utilisation et sur l'auteur.