java.lang.Object
- java.nio.channels.spi.AbstractInterruptibleChannel
- - java.nio.channels.SelectableChannel

All Implemented Interfaces:

Closeable, AutoCloseable, Channel, InterruptibleChannel

Direct Known Subclasses:

AbstractSelectableChannel
```
public abstract class SelectableChannel
extends AbstractInterruptibleChannel
implements Channel
```
A channel that can be multiplexed via a Selector.
In order to be used with a selector, an instance of this class must first be registered via the register method. This method returns a new SelectionKey object that represents the channel's registration with the selector.
Once registered with a selector, a channel remains registered until it is deregistered. This involves deallocating whatever resources were allocated to the channel by the selector.
A channel cannot be deregistered directly; instead, the key representing its registration must be cancelled. Cancelling a key requests that the channel be deregistered during the selector's next selection operation. A key may be cancelled explicitly by invoking its cancel method. All of a channel's keys are cancelled implicitly when the channel is closed, whether by invoking its close method or by interrupting a thread blocked in an I/O operation upon the channel.
If the selector itself is closed then the channel will be deregistered, and the key representing its registration will be invalidated, without further delay.
A channel may be registered at most once with any particular selector.
Whether or not a channel is registered with one or more selectors may be determined by invoking the isRegistered method.
Selectable channels are safe for use by multiple concurrent threads.

Blocking mode
A selectable channel is either in blocking mode or in non-blocking mode. In blocking mode, every I/O operation invoked upon the channel will block until it completes. In non-blocking mode an I/O operation will never block and may transfer fewer bytes than were requested or possibly no bytes at all. The blocking mode of a selectable channel may be determined by invoking its isBlocking method.
Newly-created selectable channels are always in blocking mode. Non-blocking mode is most useful in conjunction with selector-based multiplexing. A channel must be placed into non-blocking mode before being registered with a selector, and may not be returned to blocking mode until it has been deregistered.

Since:

1.4

See Also:
SelectionKey, Selector

Constructor Summary

Constructors
Modifier Constructor and Description

protected SelectableChannel()
Initializes a new instance of this class.

Method Summary

Methods
Modifier and Type	Method and Description
`abstract Object`	`blockingLock()` Retrieves the object upon which the `configureBlocking` and `register` methods synchronize.
`abstract SelectableChannel`	`configureBlocking(boolean block)` Adjusts this channel's blocking mode.
`abstract boolean`	`isBlocking()` Tells whether or not every I/O operation on this channel will block until it completes.
`abstract boolean`	`isRegistered()` Tells whether or not this channel is currently registered with any selectors.
`abstract SelectionKey`	`keyFor(Selector sel)` Retrieves the key representing the channel's registration with the given selector.
`abstract SelectorProvider`	`provider()` Returns the provider that created this channel.
`SelectionKey`	`register(Selector sel, int ops)` Registers this channel with the given selector, returning a selection key.
`abstract SelectionKey`	`register(Selector sel, int ops, Object att)` Registers this channel with the given selector, returning a selection key.
`abstract int`	`validOps()` Returns an operation set identifying this channel's supported operations.

Methods inherited from class java.nio.channels.spi.AbstractInterruptibleChannel
begin, close, end, implCloseChannel, isOpen

Methods inherited from class java.lang.Object
clone, equals, finalize, getClass, hashCode, notify, notifyAll, toString, wait, wait, wait

Methods inherited from interface java.nio.channels.Channel
close, isOpen

- Constructor Detail
  - SelectableChannel
```
protected SelectableChannel()
```
    Initializes a new instance of this class.
- Method Detail
  - provider
```
public abstract SelectorProvider provider()
```
    Returns the provider that created this channel.
    
    Returns:
    The provider that created this channel
  - validOps
```
public abstract int validOps()
```
    Returns an operation set identifying this channel's supported operations. The bits that are set in this integer value denote exactly the operations that are valid for this channel. This method always returns the same value for a given concrete channel class.
    
    Returns:
    The valid-operation set
  - isRegistered
```
public abstract boolean isRegistered()
```
    Tells whether or not this channel is currently registered with any selectors. A newly-created channel is not registered.
    Due to the inherent delay between key cancellation and channel deregistration, a channel may remain registered for some time after all of its keys have been cancelled. A channel may also remain registered for some time after it is closed.
    
    Returns:
    true if, and only if, this channel is registered
  - keyFor
```
public abstract SelectionKey keyFor(Selector sel)
```
    Retrieves the key representing the channel's registration with the given selector.
    
    Returns:
    The key returned when this channel was last registered with the given selector, or null if this channel is not currently registered with that selector
  - register
```
public abstract SelectionKey register(Selector sel,
                    int ops,
                    Object att)
                               throws ClosedChannelException
```
    Registers this channel with the given selector, returning a selection key.
    If this channel is currently registered with the given selector then the selection key representing that registration is returned. The key's interest set will have been changed to ops, as if by invoking the interestOps(int) method. If the att argument is not null then the key's attachment will have been set to that value. A CancelledKeyException will be thrown if the key has already been cancelled.
    Otherwise this channel has not yet been registered with the given selector, so it is registered and the resulting new key is returned. The key's initial interest set will be ops and its attachment will be att.
    This method may be invoked at any time. If this method is invoked while another invocation of this method or of the configureBlocking method is in progress then it will first block until the other operation is complete. This method will then synchronize on the selector's key set and therefore may block if invoked concurrently with another registration or selection operation involving the same selector.
    
    If this channel is closed while this operation is in progress then the key returned by this method will have been cancelled and will therefore be invalid.
    
    Parameters:
    sel - The selector with which this channel is to be registered
    ops - The interest set for the resulting key
    att - The attachment for the resulting key; may be null
    
    Returns:
    A key representing the registration of this channel with the given selector
    
    Throws:
    
    ClosedChannelException - If this channel is closed
    
    ClosedSelectorException - If the selector is closed
    
    IllegalBlockingModeException - If this channel is in blocking mode
    
    IllegalSelectorException - If this channel was not created by the same provider as the given selector
    
    CancelledKeyException - If this channel is currently registered with the given selector but the corresponding key has already been cancelled
    
    IllegalArgumentException - If a bit in the ops set does not correspond to an operation that is supported by this channel, that is, if set & ~validOps() != 0
  - register
```
public final SelectionKey register(Selector sel,
                    int ops)
                            throws ClosedChannelException
```
    Registers this channel with the given selector, returning a selection key.
    An invocation of this convenience method of the form
    sc.register(sel, ops)
    behaves in exactly the same way as the invocation
    sc.register(sel, ops, null)
    
    Parameters:
    sel - The selector with which this channel is to be registered
    ops - The interest set for the resulting key
    
    Returns:
    A key representing the registration of this channel with the given selector
    
    Throws:
    
    ClosedChannelException - If this channel is closed
    
    ClosedSelectorException - If the selector is closed
    
    IllegalBlockingModeException - If this channel is in blocking mode
    
    IllegalSelectorException - If this channel was not created by the same provider as the given selector
    
    CancelledKeyException - If this channel is currently registered with the given selector but the corresponding key has already been cancelled
    
    IllegalArgumentException - If a bit in ops does not correspond to an operation that is supported by this channel, that is, if set & ~validOps() != 0
  - configureBlocking
```
public abstract SelectableChannel configureBlocking(boolean block)
                                             throws IOException
```
    Adjusts this channel's blocking mode.
    If this channel is registered with one or more selectors then an attempt to place it into blocking mode will cause an IllegalBlockingModeException to be thrown.
    This method may be invoked at any time. The new blocking mode will only affect I/O operations that are initiated after this method returns. For some implementations this may require blocking until all pending I/O operations are complete.
    If this method is invoked while another invocation of this method or of the register method is in progress then it will first block until the other operation is complete.
    
    Parameters:
    block - If true then this channel will be placed in blocking mode; if false then it will be placed non-blocking mode
    
    Returns:
    This selectable channel
    
    Throws:
    
    ClosedChannelException - If this channel is closed
    
    IllegalBlockingModeException - If block is true and this channel is registered with one or more selectors
    
    IOException - If an I/O error occurs
  - isBlocking
```
public abstract boolean isBlocking()
```
    Tells whether or not every I/O operation on this channel will block until it completes. A newly-created channel is always in blocking mode.
    If this channel is closed then the value returned by this method is not specified.
    
    Returns:
    true if, and only if, this channel is in blocking mode
  - blockingLock
```
public abstract Object blockingLock()
```
    Retrieves the object upon which the configureBlocking and register methods synchronize. This is often useful in the implementation of adaptors that require a specific blocking mode to be maintained for a short period of time.
    
    Returns:
    The blocking-mode lock object

Traduction non disponible

Les API Java ne sont pas encore traduites en français sur l'infobrol. Seule la version anglaise est disponible pour l'instant.

Document créé le 31/08/2006, dernière modification le 04/03/2020
Source du document imprimé : https://www.gaudry.be/java-api-rf-java/nio/channels/SelectableChannel.html

L'infobrol est un site personnel dont le contenu n'engage que moi. Le texte est mis à disposition sous licence CreativeCommons(BY-NC-SA). Plus d'info sur les conditions d'utilisation et sur l'auteur.

Références

Manuel PHP : https://docs.oracle.com, SelectableChannel

Ces références et liens indiquent des documents consultés lors de la rédaction de cette page, ou qui peuvent apporter un complément d'information, mais les auteurs de ces sources ne peuvent être tenus responsables du contenu de cette page.
L'auteur de ce site est seul responsable de la manière dont sont présentés ici les différents concepts, et des libertés qui sont prises avec les ouvrages de référence. N'oubliez pas que vous devez croiser les informations de sources multiples afin de diminuer les risques d'erreurs.

Table des matières Haut

Class SelectableChannel

Blocking mode

Constructor Summary

Method Summary

Methods inherited from class java.nio.channels.spi.AbstractInterruptibleChannel

Methods inherited from class java.lang.Object

Methods inherited from interface java.nio.channels.Channel

Constructor Detail

SelectableChannel

Method Detail

provider

validOps

isRegistered

keyFor

register

register

configureBlocking

isBlocking

blockingLock

Références

Paramètres du site

Fonctions utilisateur×

Class SelectableChannel

Blocking mode

Constructor Summary

Method Summary

Methods inherited from class java.nio.channels.spi.AbstractInterruptibleChannel

Methods inherited from class java.lang.Object

Methods inherited from interface java.nio.channels.Channel

Constructor Detail

SelectableChannel

Method Detail

provider

validOps

isRegistered

keyFor

register

register

configureBlocking

isBlocking

blockingLock

Références

Dans ce chapitre

Etiquettes

Statistiques