- java.lang.Object
-
- javax.swing.SizeSequence
-
public class SizeSequence extends Object
ASizeSequence
object efficiently maintains an ordered list of sizes and corresponding positions. One situation for whichSizeSequence
might be appropriate is in a component that displays multiple rows of unequal size. In this case, a singleSizeSequence
object could be used to track the heights and Y positions of all rows.Another example would be a multi-column component, such as a
JTable
, in which the column sizes are not all equal. TheJTable
might use a singleSizeSequence
object to store the widths and X positions of all the columns. TheJTable
could then use theSizeSequence
object to find the column corresponding to a certain position. TheJTable
could update theSizeSequence
object whenever one or more column sizes changed.The following figure shows the relationship between size and position data for a multi-column component.
In the figure, the first index (0) corresponds to the first column, the second index (1) to the second column, and so on. The first column's position starts at 0, and the column occupies size0 pixels, where size0 is the value returned by
getSize(0)
. Thus, the first column ends at size0 - 1. The second column then begins at the position size0 and occupies size1 (getSize(1)
) pixels.Note that a
SizeSequence
object simply represents intervals along an axis. In our examples, the intervals represent height or width in pixels. However, any other unit of measure (for example, time in days) could be just as valid.Implementation Notes
Normally when storing the size and position of entries, one would choose between storing the sizes or storing their positions instead. The two common operations that are needed during rendering are:getIndex(position)
andsetSize(index, size)
. Whichever choice of internal format is made one of these operations is costly when the number of entries becomes large. If sizes are stored, finding the index of the entry that encloses a particular position is linear in the number of entries. If positions are stored instead, setting the size of an entry at a particular index requires updating the positions of the affected entries, which is also a linear calculation.Like the above techniques this class holds an array of N integers internally but uses a hybrid encoding, which is halfway between the size-based and positional-based approaches. The result is a data structure that takes the same space to store the information but can perform most operations in Log(N) time instead of O(N), where N is the number of entries in the list.
Two operations that remain O(N) in the number of entries are the
insertEntries
andremoveEntries
methods, both of which are implemented by converting the internal array to a set of integer sizes, copying it into the new array, and then reforming the hybrid representation in place.- Since:
- 1.3
-
-
Constructor Summary
Constructors Constructor and Description SizeSequence()
Creates a newSizeSequence
object that contains no entries.SizeSequence(int numEntries)
Creates a newSizeSequence
object that contains the specified number of entries, all initialized to have size 0.SizeSequence(int[] sizes)
Creates a newSizeSequence
object that contains the specified sizes.SizeSequence(int numEntries, int value)
Creates a newSizeSequence
object that contains the specified number of entries, all initialized to have sizevalue
.
-
Method Summary
Methods Modifier and Type Method and Description int
getIndex(int position)
Returns the index of the entry that corresponds to the specified position.int
getPosition(int index)
Returns the start position for the specified entry.int
getSize(int index)
Returns the size of the specified entry.int[]
getSizes()
Returns the size of all entries.void
insertEntries(int start, int length, int value)
Adds a contiguous group of entries to thisSizeSequence
.void
removeEntries(int start, int length)
Removes a contiguous group of entries from thisSizeSequence
.void
setSize(int index, int size)
Sets the size of the specified entry.void
setSizes(int[] sizes)
Resets thisSizeSequence
object, using the data in thesizes
argument.
-
-
-
Constructor Detail
-
SizeSequence
public SizeSequence()
Creates a newSizeSequence
object that contains no entries. To add entries, you can useinsertEntries
orsetSizes
.- See Also:
insertEntries(int, int, int)
,setSizes(int[])
-
SizeSequence
public SizeSequence(int numEntries)
Creates a newSizeSequence
object that contains the specified number of entries, all initialized to have size 0.- Parameters:
numEntries
- the number of sizes to track- Throws:
NegativeArraySizeException
- ifnumEntries < 0
-
SizeSequence
public SizeSequence(int numEntries, int value)
Creates a newSizeSequence
object that contains the specified number of entries, all initialized to have sizevalue
.- Parameters:
numEntries
- the number of sizes to trackvalue
- the initial value of each size
-
SizeSequence
public SizeSequence(int[] sizes)
Creates a newSizeSequence
object that contains the specified sizes.- Parameters:
sizes
- the array of sizes to be contained in theSizeSequence
-
-
Method Detail
-
setSizes
public void setSizes(int[] sizes)
Resets thisSizeSequence
object, using the data in thesizes
argument. This method reinitializes this object so that it contains as many entries as thesizes
array. Each entry's size is initialized to the value of the corresponding item insizes
.- Parameters:
sizes
- the array of sizes to be contained in thisSizeSequence
-
getSizes
public int[] getSizes()
Returns the size of all entries.- Returns:
- a new array containing the sizes in this object
-
getPosition
public int getPosition(int index)
Returns the start position for the specified entry. For example,getPosition(0)
returns 0,getPosition(1)
is equal togetSize(0)
,getPosition(2)
is equal togetSize(0)
+getSize(1)
, and so on.Note that if
index
is greater thanlength
the value returned may be meaningless.- Parameters:
index
- the index of the entry whose position is desired- Returns:
- the starting position of the specified entry
-
getIndex
public int getIndex(int position)
Returns the index of the entry that corresponds to the specified position. For example,getIndex(0)
is 0, since the first entry always starts at position 0.- Parameters:
position
- the position of the entry- Returns:
- the index of the entry that occupies the specified position
-
getSize
public int getSize(int index)
Returns the size of the specified entry. Ifindex
is out of the range(0 <= index < getSizes().length)
the behavior is unspecified.- Parameters:
index
- the index corresponding to the entry- Returns:
- the size of the entry
-
setSize
public void setSize(int index, int size)
Sets the size of the specified entry. Note that if the value ofindex
does not fall in the range:(0 <= index < getSizes().length)
the behavior is unspecified.- Parameters:
index
- the index corresponding to the entrysize
- the size of the entry
-
insertEntries
public void insertEntries(int start, int length, int value)
Adds a contiguous group of entries to thisSizeSequence
. Note that the values ofstart
andlength
must satisfy the following conditions:(0 <= start < getSizes().length) AND (length >= 0)
. If these conditions are not met, the behavior is unspecified and an exception may be thrown.- Parameters:
start
- the index to be assigned to the first entry in the grouplength
- the number of entries in the groupvalue
- the size to be assigned to each new entry- Throws:
ArrayIndexOutOfBoundsException
- if the parameters are outside of the range: (0 <= start < (getSizes().length)) AND (length >= 0)
-
removeEntries
public void removeEntries(int start, int length)
Removes a contiguous group of entries from thisSizeSequence
. Note that the values ofstart
andlength
must satisfy the following conditions:(0 <= start < getSizes().length) AND (length >= 0)
. If these conditions are not met, the behavior is unspecified and an exception may be thrown.- Parameters:
start
- the index of the first entry to be removedlength
- the number of entries to be removed
-
-
Document created the 11/06/2005, last modified the 04/03/2020
Source of the printed document:https://www.gaudry.be/en/java-api-rf-javax/swing/sizesequence.html/.html/
The infobrol is a personal site whose content is my sole responsibility. The text is available under CreativeCommons license (BY-NC-SA). More info on the terms of use and the author.
References
These references and links indicate documents consulted during the writing of this page, or which may provide additional information, but the authors of these sources can not be held responsible for the content of this page.
The author This site is solely responsible for the way in which the various concepts, and the freedoms that are taken with the reference works, are presented here. Remember that you must cross multiple source information to reduce the risk of errors.