Geen cache-versie.
Caching uitgeschakeld. Standaardinstelling voor deze pagina:ingeschakeld (code LNG204)Als het scherm te langzaam is, kunt u de gebruikersmodus uitschakelen om de cacheversie te bekijken.
printf
(PHP 4, PHP 5, PHP 7)
printf — Output a formatted string
Parameters
-
format -
The format string is composed of zero or more directives: ordinary characters (excluding %) that are copied directly to the result and conversion specifications, each of which results in fetching its own parameter.
A conversion specification follows this prototype: %[flags][width][.precision]specifier.
Flags Flag Description - Left-justify within the given field width; Right justification is the default + Prefix positive numbers with a plus sign +; Default only negative are prefixed with a negative sign. (space) Pads the result with spaces. This is the default. 0 Only left-pads numbers with zeros. With s specifiers this can also right-pad with zeros. '(char) Pads the result with the character (char). Width
An integer that says how many characters (minimum) this conversion should result in.
Precision
A period . followed by an integer who's meaning depends on the specifier:
- For e, E, f and F specifiers: this is the number of digits to be printed after the decimal point (by default, this is 6).
- For g and G specifiers: this is the maximum number of significant digits to be printed.
- For s specifier: it acts as a cutoff point, setting a maximum character limit to the string.
Note: If the period is specified without an explicit value for precision, 0 is assumed.
Note: Attempting to use a position specifier greater than
PHP_INT_MAXwill generate warnings.Specifiers Specifier Description % A literal percent character. No argument is required. b The argument is treated as an integer and presented as a binary number. c The argument is treated as an integer and presented as the character with that ASCII. d The argument is treated as an integer and presented as a (signed) decimal number. e The argument is treated as scientific notation (e.g. 1.2e+2). The precision specifier stands for the number of digits after the decimal point since PHP 5.2.1. In earlier versions, it was taken as number of significant digits (one less). E Like the e specifier but uses uppercase letter (e.g. 1.2E+2). f The argument is treated as a float and presented as a floating-point number (locale aware). F The argument is treated as a float and presented as a floating-point number (non-locale aware). Available as of PHP 5.0.3. g General format.
Let P equal the precision if nonzero, 6 if the precision is omitted, or 1 if the precision is zero. Then, if a conversion with style E would have an exponent of X:
If P > X ≥ −4, the conversion is with style f and precision P − (X + 1). Otherwise, the conversion is with style e and precision P − 1.
G Like the g specifier but uses E and F. o The argument is treated as an integer and presented as an octal number. s The argument is treated and presented as a string. u The argument is treated as an integer and presented as an unsigned decimal number. x The argument is treated as an integer and presented as a hexadecimal number (with lowercase letters). X The argument is treated as an integer and presented as a hexadecimal number (with uppercase letters). WarningThe c type specifier ignores padding and width
WarningAttempting to use a combination of the string and width specifiers with character sets that require more than one byte per character may result in unexpected results
Variables will be co-erced to a suitable type for the specifier:
Type Handling Type Specifiers string s integer d, u, c, o, x, X, b double g, G, e, E, f, F -
... -
Examples
Example #1 printf(): various examples
<?php
$n = 43951789;
$u = -43951789;
$c = 65; // ASCII 65 is 'A'
// notice the double %%, this prints a literal '%' character
printf("%%b = '%b'\n", $n); // binary representation
printf("%%c = '%c'\n", $c); // print the ascii character, same as chr() function
printf("%%d = '%d'\n", $n); // standard integer representation
printf("%%e = '%e'\n", $n); // scientific notation
printf("%%u = '%u'\n", $n); // unsigned integer representation of a positive integer
printf("%%u = '%u'\n", $u); // unsigned integer representation of a negative integer
printf("%%f = '%f'\n", $n); // floating point representation
printf("%%o = '%o'\n", $n); // octal representation
printf("%%s = '%s'\n", $n); // string representation
printf("%%x = '%x'\n", $n); // hexadecimal representation (lower-case)
printf("%%X = '%X'\n", $n); // hexadecimal representation (upper-case)
printf("%%+d = '%+d'\n", $n); // sign specifier on a positive integer
printf("%%+d = '%+d'\n", $u); // sign specifier on a negative integer
?>
The above example will output:
%b = '10100111101010011010101101' %c = 'A' %d = '43951789' %e = '4.39518e+7' %u = '43951789' %u = '4251015507' %f = '43951789.000000' %o = '247523255' %s = '43951789' %x = '29ea6ad' %X = '29EA6AD' %+d = '+43951789' %+d = '-43951789'
Example #2 printf(): string specifiers
<?php
$s = 'monkey';
$t = 'many monkeys';
printf("[%s]\n", $s); // standard string output
printf("[%10s]\n", $s); // right-justification with spaces
printf("[%-10s]\n", $s); // left-justification with spaces
printf("[%010s]\n", $s); // zero-padding works on strings too
printf("[%'#10s]\n", $s); // use the custom padding character '#'
printf("[%10.9s]\n", $t); // right-justification but with a cutoff of 8 characters
printf("[%-10.9s]\n", $t); // left-justification but with a cutoff of 8 characters
?>
The above example will output:
[monkey] [ monkey] [monkey ] [0000monkey] [####monkey] [ many monk] [many monk ]
See Also
- print - Output a string
- sprintf() - Return a formatted string
- fprintf() - Write a formatted string to a stream
- vprintf() - Output a formatted string
- vsprintf() - Return a formatted string
- vfprintf() - Write a formatted string to a stream
- sscanf() - Parses input from a string according to a format
- fscanf() - Parses input from a file according to a format
- number_format() - Format a number with grouped thousands
- date() - Format a local time/date
- flush() - Flush system output buffer
Vertaling niet beschikbaar
De PHP-handleiding is nog niet in het Nederlands vertaald, dus het scherm is in het Engels. Als u wilt, kunt u het ook in het Frans of in het Duits raadplegen.
Als je de moed voelt, kun je je vertaling aanbieden ;-)
Nederlandse vertaling
U hebt gevraagd om deze site in het Nederlands te bezoeken. Voor nu wordt alleen de interface vertaald, maar nog niet alle inhoud.Als je me wilt helpen met vertalingen, is je bijdrage welkom. Het enige dat u hoeft te doen, is u op de site registreren en mij een bericht sturen waarin u wordt gevraagd om u toe te voegen aan de groep vertalers, zodat u de gewenste pagina's kunt vertalen. Een link onderaan elke vertaalde pagina geeft aan dat u de vertaler bent en heeft een link naar uw profiel.
Bij voorbaat dank.
Document heeft de 30/01/2003 gemaakt, de laatste keer de 26/10/2018 gewijzigd
Bron van het afgedrukte document:https://www.gaudry.be/nl/php-rf-function.printf.html
De infobrol is een persoonlijke site waarvan de inhoud uitsluitend mijn verantwoordelijkheid is. De tekst is beschikbaar onder CreativeCommons-licentie (BY-NC-SA). Meer info op de gebruiksvoorwaarden en de auteur.
Referenties
Deze verwijzingen en links verwijzen naar documenten die geraadpleegd zijn tijdens het schrijven van deze pagina, of die aanvullende informatie kunnen geven, maar de auteurs van deze bronnen kunnen niet verantwoordelijk worden gehouden voor de inhoud van deze pagina.
De auteur Deze site is als enige verantwoordelijk voor de manier waarop de verschillende concepten, en de vrijheden die met de referentiewerken worden genomen, hier worden gepresenteerd. Vergeet niet dat u meerdere broninformatie moet doorgeven om het risico op fouten te verkleinen.
