Keine Cache-Version

Caching deaktiviert Standardeinstellung für diese Seite:aktiviert (code LNG204)
Wenn die Anzeige zu langsam ist, können Sie den Benutzermodus deaktivieren, um die zwischengespeicherte Version anzuzeigen.
javax.swing

Class DefaultListSelectionModel

Inhaltsverzeichnis
  • All Implemented Interfaces:
    Serializable, Cloneable, ListSelectionModel

    public class DefaultListSelectionModel
extends Object
implements ListSelectionModel, Cloneable, Serializable
    Default data model for list selections.

    Warning: Serialized objects of this class will not be compatible with future Swing releases. The current serialization support is appropriate for short term storage or RMI between applications running the same version of Swing. As of 1.4, support for long term storage of all JavaBeansTM has been added to the java.beans package. Please see XMLEncoder.

    See Also:
    ListSelectionModel

    • Field Detail

      • leadAnchorNotificationEnabled

        protected boolean leadAnchorNotificationEnabled

    • Constructor Detail

      • DefaultListSelectionModel

        public DefaultListSelectionModel()

    • Method Detail

      • getMinSelectionIndex

        public int getMinSelectionIndex()
        Returns the first selected index or -1 if the selection is empty.
        Specified by:
        getMinSelectionIndex in interface ListSelectionModel

      • getMaxSelectionIndex

        public int getMaxSelectionIndex()
        Returns the last selected index or -1 if the selection is empty.
        Specified by:
        getMaxSelectionIndex in interface ListSelectionModel

      • setSelectionMode

        public void setSelectionMode(int selectionMode)
        Sets the selection mode. The following list describes the accepted selection modes:
        • ListSelectionModel.SINGLE_SELECTION - Only one list index can be selected at a time. In this mode, setSelectionInterval and addSelectionInterval are equivalent, both replacing the current selection with the index represented by the second argument (the "lead").
        • ListSelectionModel.SINGLE_INTERVAL_SELECTION - Only one contiguous interval can be selected at a time. In this mode, addSelectionInterval behaves like setSelectionInterval (replacing the current selection), unless the given interval is immediately adjacent to or overlaps the existing selection, and can therefore be used to grow it.
        • ListSelectionModel.MULTIPLE_INTERVAL_SELECTION - In this mode, there's no restriction on what can be selected.
        Specified by:
        setSelectionMode in interface ListSelectionModel
        Throws:
        IllegalArgumentException - if the selection mode isn't one of those allowed
        See Also:
        ListSelectionModel.getSelectionMode()

      • isSelectedIndex

        public boolean isSelectedIndex(int index)
        Returns true if the specified index is selected.
        Specified by:
        isSelectedIndex in interface ListSelectionModel

      • fireValueChanged

        protected void fireValueChanged(boolean isAdjusting)
        Notifies listeners that we have ended a series of adjustments.

      • fireValueChanged

        protected void fireValueChanged(int firstIndex,
                    int lastIndex)
        Notifies ListSelectionListeners that the value of the selection, in the closed interval firstIndex, lastIndex, has changed.

      • fireValueChanged

        protected void fireValueChanged(int firstIndex,
                    int lastIndex,
                    boolean isAdjusting)
        Parameters:
        firstIndex - the first index in the interval
        lastIndex - the last index in the interval
        isAdjusting - true if this is the final change in a series of adjustments
        See Also:
        EventListenerList

      • getListeners

        public <T extends EventListener> T[] getListeners(Class<T> listenerType)
        Returns an array of all the objects currently registered as FooListeners upon this model. FooListeners are registered using the addFooListener method.

        You can specify the listenerType argument with a class literal, such as FooListener.class. For example, you can query a DefaultListSelectionModel instance m for its list selection listeners with the following code: 

        ListSelectionListener[] lsls = (ListSelectionListener[])(m.getListeners(ListSelectionListener.class));
        If no such listeners exist, this method returns an empty array.
        Parameters:
        listenerType - the type of listeners requested; this parameter should specify an interface that descends from java.util.EventListener
        Returns:
        an array of all objects registered as FooListeners on this model, or an empty array if no such listeners have been added
        Throws:
        ClassCastException - if listenerType doesn't specify a class or interface that implements java.util.EventListener
        Since:
        1.3
        See Also:
        getListSelectionListeners()

      • setLeadAnchorNotificationEnabled

        public void setLeadAnchorNotificationEnabled(boolean flag)
        Sets the value of the leadAnchorNotificationEnabled flag.
        See Also:
        isLeadAnchorNotificationEnabled()

      • isLeadAnchorNotificationEnabled

        public boolean isLeadAnchorNotificationEnabled()
        Returns the value of the leadAnchorNotificationEnabled flag. When leadAnchorNotificationEnabled is true the model generates notification events with bounds that cover all the changes to the selection plus the changes to the lead and anchor indices. Setting the flag to false causes a narrowing of the event's bounds to include only the elements that have been selected or deselected since the last change. Either way, the model continues to maintain the lead and anchor variables internally. The default is true.

        Note: It is possible for the lead or anchor to be changed without a change to the selection. Notification of these changes is often important, such as when the new lead or anchor needs to be updated in the view. Therefore, caution is urged when changing the default value.

        Returns:
        the value of the leadAnchorNotificationEnabled flag
        See Also:
        setLeadAnchorNotificationEnabled(boolean)

      • setSelectionInterval

        public void setSelectionInterval(int index0,
                        int index1)
        Changes the selection to be between index0 and index1 inclusive. index0 doesn't have to be less than or equal to index1.

        In SINGLE_SELECTION selection mode, only the second index is used.

        If this represents a change to the current selection, then each ListSelectionListener is notified of the change.

        If either index is -1, this method does nothing and returns without exception. Otherwise, if either index is less than -1, an IndexOutOfBoundsException is thrown.

        Specified by:
        setSelectionInterval in interface ListSelectionModel
        Parameters:
        index0 - one end of the interval.
        index1 - other end of the interval
        Throws:
        IndexOutOfBoundsException - if either index is less than -1 (and neither index is -1)
        See Also:
        addListSelectionListener(javax.swing.event.ListSelectionListener)

      • addSelectionInterval

        public void addSelectionInterval(int index0,
                        int index1)
        Changes the selection to be the set union of the current selection and the indices between index0 and index1 inclusive.

        In SINGLE_SELECTION selection mode, this is equivalent to calling setSelectionInterval, and only the second index is used. In SINGLE_INTERVAL_SELECTION selection mode, this method behaves like setSelectionInterval, unless the given interval is immediately adjacent to or overlaps the existing selection, and can therefore be used to grow it.

        If this represents a change to the current selection, then each ListSelectionListener is notified of the change. Note that index0 doesn't have to be less than or equal to index1.

        If either index is -1, this method does nothing and returns without exception. Otherwise, if either index is less than -1, an IndexOutOfBoundsException is thrown.

        Specified by:
        addSelectionInterval in interface ListSelectionModel
        Parameters:
        index0 - one end of the interval.
        index1 - other end of the interval
        Throws:
        IndexOutOfBoundsException - if either index is less than -1 (and neither index is -1)
        See Also:
        addListSelectionListener(javax.swing.event.ListSelectionListener), setSelectionInterval(int, int)

      • removeSelectionInterval

        public void removeSelectionInterval(int index0,
                           int index1)
        Changes the selection to be the set difference of the current selection and the indices between index0 and index1 inclusive. index0 doesn't have to be less than or equal to index1.

        In SINGLE_INTERVAL_SELECTION selection mode, if the removal would produce two disjoint selections, the removal is extended through the greater end of the selection. For example, if the selection is 0-10 and you supply indices 5,6 (in any order) the resulting selection is 0-4.

        If this represents a change to the current selection, then each ListSelectionListener is notified of the change.

        If either index is -1, this method does nothing and returns without exception. Otherwise, if either index is less than -1, an IndexOutOfBoundsException is thrown.

        Specified by:
        removeSelectionInterval in interface ListSelectionModel
        Parameters:
        index0 - one end of the interval
        index1 - other end of the interval
        Throws:
        IndexOutOfBoundsException - if either index is less than -1 (and neither index is -1)
        See Also:
        addListSelectionListener(javax.swing.event.ListSelectionListener)

      • insertIndexInterval

        public void insertIndexInterval(int index,
                       int length,
                       boolean before)
        Insert length indices beginning before/after index. If the value at index is itself selected and the selection mode is not SINGLE_SELECTION, set all of the newly inserted items as selected. Otherwise leave them unselected. This method is typically called to sync the selection model with a corresponding change in the data model.
        Specified by:
        insertIndexInterval in interface ListSelectionModel

      • removeIndexInterval

        public void removeIndexInterval(int index0,
                       int index1)
        Remove the indices in the interval index0,index1 (inclusive) from the selection model. This is typically called to sync the selection model width a corresponding change in the data model. Note that (as always) index0 need not be <= index1.
        Specified by:
        removeIndexInterval in interface ListSelectionModel

      • setValueIsAdjusting

        public void setValueIsAdjusting(boolean isAdjusting)
        Sets the valueIsAdjusting property, which indicates whether or not upcoming selection changes should be considered part of a single change. The value of this property is used to initialize the valueIsAdjusting property of the ListSelectionEvents that are generated.

        For example, if the selection is being updated in response to a user drag, this property can be set to true when the drag is initiated and set to false when the drag is finished. During the drag, listeners receive events with a valueIsAdjusting property set to true. At the end of the drag, when the change is finalized, listeners receive an event with the value set to false. Listeners can use this pattern if they wish to update only when a change has been finalized.

        Setting this property to true begins a series of changes that is to be considered part of a single change. When the property is changed back to false, an event is sent out characterizing the entire selection change (if there was one), with the event's valueIsAdjusting property set to false.

        Specified by:
        setValueIsAdjusting in interface ListSelectionModel
        Parameters:
        isAdjusting - the new value of the property
        See Also:
        ListSelectionModel.getValueIsAdjusting(), ListSelectionEvent.getValueIsAdjusting()

      • toString

        public String toString()
        Returns a string that displays and identifies this object's properties.
        Overrides:
        toString in class Object
        Returns:
        a String representation of this object

      • clone

        public Object clone()
             throws CloneNotSupportedException
        Returns a clone of this selection model with the same selection. listenerLists are not duplicated.
        Overrides:
        clone in class Object
        Returns:
        a clone of this instance.
        Throws:
        CloneNotSupportedException - if the selection model does not both (a) implement the Cloneable interface and (b) define a clone method.
        See Also:
        Cloneable

      • moveLeadSelectionIndex

        public void moveLeadSelectionIndex(int leadIndex)
        Set the lead selection index, leaving all selection values unchanged. If leadAnchorNotificationEnabled is true, send a notification covering the old and new lead cells.
        Parameters:
        leadIndex - the new lead selection index
        Since:
        1.5
        See Also:
        setAnchorSelectionIndex(int), setLeadSelectionIndex(int), getLeadSelectionIndex()

      • setLeadSelectionIndex

        public void setLeadSelectionIndex(int leadIndex)
        Sets the lead selection index, ensuring that values between the anchor and the new lead are either all selected or all deselected. If the value at the anchor index is selected, first clear all the values in the range [anchor, oldLeadIndex], then select all the values values in the range [anchor, newLeadIndex], where oldLeadIndex is the old leadIndex and newLeadIndex is the new one.

        If the value at the anchor index is not selected, do the same thing in reverse selecting values in the old range and deslecting values in the new one.

        Generate a single event for this change and notify all listeners. For the purposes of generating minimal bounds in this event, do the operation in a single pass; that way the first and last index inside the ListSelectionEvent that is broadcast will refer to cells that actually changed value because of this method. If, instead, this operation were done in two steps the effect on the selection state would be the same but two events would be generated and the bounds around the changed values would be wider, including cells that had been first cleared only to later be set.

        This method can be used in the mouseDragged method of a UI class to extend a selection.

        Specified by:
        setLeadSelectionIndex in interface ListSelectionModel
        See Also:
        getLeadSelectionIndex(), setAnchorSelectionIndex(int)

Deutsche Übersetzung

Sie haben gebeten, diese Seite auf Deutsch zu besuchen. Momentan ist nur die Oberfläche übersetzt, aber noch nicht der gesamte Inhalt.

Wenn Sie mir bei Übersetzungen helfen wollen, ist Ihr Beitrag willkommen. Alles, was Sie tun müssen, ist, sich auf der Website zu registrieren und mir eine Nachricht zu schicken, in der Sie gebeten werden, Sie der Gruppe der Übersetzer hinzuzufügen, die Ihnen die Möglichkeit gibt, die gewünschten Seiten zu übersetzen. Ein Link am Ende jeder übersetzten Seite zeigt an, dass Sie der Übersetzer sind und einen Link zu Ihrem Profil haben.

Vielen Dank im Voraus.

Dokument erstellt 11/06/2005, zuletzt geändert 04/03/2020
Quelle des gedruckten Dokuments:https://www.gaudry.be/de/java-api-rf-javax/swing/defaultlistselectionmodel.html

Die Infobro ist eine persönliche Seite, deren Inhalt in meiner alleinigen Verantwortung liegt. Der Text ist unter der CreativeCommons-Lizenz (BY-NC-SA) verfügbar. Weitere Informationen auf die Nutzungsbedingungen und dem Autor.

Referenzen

  1. Zeigen Sie - html-Dokument Sprache des Dokuments:fr Manuel PHP : https://docs.oracle.com

Diese Verweise und Links verweisen auf Dokumente, die während des Schreibens dieser Seite konsultiert wurden, oder die zusätzliche Informationen liefern können, aber die Autoren dieser Quellen können nicht für den Inhalt dieser Seite verantwortlich gemacht werden.
Der Autor Diese Website ist allein dafür verantwortlich, wie die verschiedenen Konzepte und Freiheiten, die mit den Nachschlagewerken gemacht werden, hier dargestellt werden. Denken Sie daran, dass Sie mehrere Quellinformationen austauschen müssen, um das Risiko von Fehlern zu reduzieren.

Inhaltsverzeichnis Haut