java.lang.Object
- javax.faces.validator.LongRangeValidator

All Implemented Interfaces:

EventListener, PartialStateHolder, StateHolder, Validator
```
public class LongRangeValidator
extends Object
implements Validator, PartialStateHolder
```
LongRangeValidator is a Validator that checks the value of the corresponding component against specified minimum and maximum values. The following algorithm is implemented:
- If the passed value is null, exit immediately.
- If the current component value is not a floating point type, or a String that is convertible to long, throw a ValidatorException containing a TYPE_MESSAGE_ID message.
- If both a maximum and minimum property has been configured on this Validator, check the component value against both limits. If the component value is not within this specified range, throw a ValidatorException containing a NOT_IN_RANGE_MESSAGE_ID message.
- If a maximum property has been configured on this Validator, check the component value against this limit. If the component value is greater than the specified maximum, throw a ValidatorException containing a MAXIMUM_MESSAGE_ID message.
- If a minimum property has been configured on this Validator, check the component value against this limit. If the component value is less than the specified minimum, throw a ValidatorException containing a MINIMUM_MESSAGE_ID message.
For all of the above cases that cause a ValidatorException to be thrown, if there are parameters to the message that match up with validator parameters, the values of these parameters must be converted using the Converter registered in the application under the converter id javax.faces.Number. This allows the values to be localized according to the current Locale.

Field Summary

Fields
Modifier and Type	Field and Description
`static String`	`MAXIMUM_MESSAGE_ID` The message identifier of the `FacesMessage` to be created if the maximum value check fails.
`static String`	`MINIMUM_MESSAGE_ID` The message identifier of the `FacesMessage` to be created if the minimum value check fails.
`static String`	`NOT_IN_RANGE_MESSAGE_ID` The message identifier of the `FacesMessage` to be created if the maximum or minimum value check fails, and both the maximum and minimum values for this validator have been set.
`static String`	`TYPE_MESSAGE_ID` The message identifier of the `FacesMessage` to be created if the current value of this component is not of the correct type.
`static String`	`VALIDATOR_ID` The standard converter id for this converter.

Erste Seite von API Java Inhaltsverzeichnis Haut

Constructor Summary

Constructors
Constructor and Description
`LongRangeValidator()` Construct a `Validator` with no preconfigured limits.
`LongRangeValidator(long maximum)` Construct a `Validator` with the specified preconfigured limit.
`LongRangeValidator(long maximum, long minimum)` Construct a `Validator` with the specified preconfigured limits.

Erste Seite von API Java Inhaltsverzeichnis Haut

Method Summary

All Methods Instance Methods Concrete Methods
Modifier and Type	Method and Description
`void`	`clearInitialState()` Reset the PartialStateHolder to a non-delta tracking state.
`boolean`	`equals(Object otherObj)`
`long`	`getMaximum()` Return the maximum value to be enforced by this `Validator`.
`long`	`getMinimum()` Return the minimum value to be enforced by this `Validator`.
`int`	`hashCode()`
`boolean`	`initialStateMarked()` Return `true` if delta state changes are being tracked, otherwise `false`
`boolean`	`isTransient()` If true, the Object implementing this interface must not participate in state saving or restoring.
`void`	`markInitialState()` The runtime must ensure that the `PartialStateHolder.markInitialState()` method is called on each instance of this interface in the view at the appropriate time to indicate the component is in its initial state.
`void`	`restoreState(FacesContext context, Object state)` Perform any processing required to restore the state from the entries in the state Object.
`Object`	`saveState(FacesContext context)` Gets the state of the instance as a `Serializable` Object.
`void`	`setMaximum(long maximum)` Set the maximum value to be enforced by this `Validator`.
`void`	`setMinimum(long minimum)` Set the minimum value to be enforced by this `Validator`.
`void`	`setTransient(boolean transientValue)` Denotes whether or not the Object implementing this interface must or must not participate in state saving or restoring.
`void`	`validate(FacesContext context, UIComponent component, Object value)` Perform the correctness checks implemented by this `Validator` against the specified `UIComponent`.

Erste Seite von API Java Inhaltsverzeichnis Haut

Methods inherited from class java.lang.Object
clone, finalize, getClass, notify, notifyAll, toString, wait, wait, wait

- Field Detail
  - VALIDATOR_ID
```
public static final String VALIDATOR_ID
```
    The standard converter id for this converter.
    
    See Also:
    
    Constant Field Values
  - MAXIMUM_MESSAGE_ID
```
public static final String MAXIMUM_MESSAGE_ID
```
    The message identifier of the FacesMessage to be created if the maximum value check fails. The message format string for this message may optionally include the following placeholders:
    - {0} replaced by the configured maximum value.
    - {1} replaced by a String whose value is the label of the input component that produced this message.
    See Also:
    
    Constant Field Values
  - MINIMUM_MESSAGE_ID
```
public static final String MINIMUM_MESSAGE_ID
```
    The message identifier of the FacesMessage to be created if the minimum value check fails. The message format string for this message may optionally include the following placeholders:
    - {0} replaced by the configured minimum value.
    - {1} replaced by a String whose value is the label of the input component that produced this message.
    See Also:
    
    Constant Field Values
  - NOT_IN_RANGE_MESSAGE_ID
```
public static final String NOT_IN_RANGE_MESSAGE_ID
```
    The message identifier of the FacesMessage to be created if the maximum or minimum value check fails, and both the maximum and minimum values for this validator have been set. The message format string for this message may optionally include the following placeholders:
    - {0} replaced by the configured minimum value.
    - {1} replaced by the configured maximum value.
    - {2} replaced by a String whose value is the label of the input component that produced this message.
    See Also:
    
    Constant Field Values
  - TYPE_MESSAGE_ID
```
public static final String TYPE_MESSAGE_ID
```
    The message identifier of the FacesMessage to be created if the current value of this component is not of the correct type. The message format string for this message may optionally include a {0} placeholder that will be replaced by a String whose value is the label of the input component that produced this message.
    
    See Also:
    
    Constant Field Values
- Constructor Detail
  - LongRangeValidator
```
public LongRangeValidator()
```
    Construct a Validator with no preconfigured limits.
  - LongRangeValidator
```
public LongRangeValidator(long maximum)
```
    Construct a Validator with the specified preconfigured limit.
    
    Parameters:
    
    maximum - Maximum value to allow
  - LongRangeValidator
```
public LongRangeValidator(long maximum,
                          long minimum)
```
    Construct a Validator with the specified preconfigured limits.
    
    Parameters:
    
    maximum - Maximum value to allow
    
    minimum - Minimum value to allow
- Method Detail
  - getMaximum
```
public long getMaximum()
```
    Return the maximum value to be enforced by this Validator.
  - setMaximum
```
public void setMaximum(long maximum)
```
    Set the maximum value to be enforced by this Validator.
    
    Parameters:
    
    maximum - The new maximum value
  - getMinimum
```
public long getMinimum()
```
    Return the minimum value to be enforced by this Validator.
  - setMinimum
```
public void setMinimum(long minimum)
```
    Set the minimum value to be enforced by this Validator.
    
    Parameters:
    
    minimum - The new minimum value
  - validate
```
public void validate(FacesContext context,
                     UIComponent component,
                     Object value)
              throws ValidatorException
```
    Description copied from interface: Validator
    
    Perform the correctness checks implemented by this Validator against the specified UIComponent. If any violations are found, a ValidatorException will be thrown containing the FacesMessage describing the failure.
    
    For a validator to be fully compliant with Version 2 and later of the specification, it must not fail validation on null or empty values unless it is specifically intended to address null or empty values. An application-wide <context-param> is provided to allow validators designed for JSF 1.2 to work with JSF 2 and later. The javax.faces.VALIDATE_EMPTY_FIELDS <context-param> must be set to false to enable this backwards compatibility behavior.
    
    Specified by:
    
    validate in interface Validator
    
    Parameters:
    
    context - FacesContext for the request we are processing
    
    component - UIComponent we are checking for correctness
    
    value - the value to validate
    
    Throws:
    
    NullPointerException - if context or component is null
    
    ValidatorException - if validation fails
  - equals
```
public boolean equals(Object otherObj)
```
    Overrides:
    
    equals in class Object
  - hashCode
```
public int hashCode()
```
    Overrides:
    
    hashCode in class Object
  - saveState
```
public Object saveState(FacesContext context)
```
    Description copied from interface: StateHolder
    Gets the state of the instance as a Serializable Object.
    
    If the class that implements this interface has references to instances that implement StateHolder (such as a UIComponent with event handlers, validators, etc.) this method must call the StateHolder.saveState(javax.faces.context.FacesContext) method on all those instances as well. This method must not save the state of children and facets. That is done via the StateManager
    
    This method must not alter the state of the implementing object. In other words, after executing this code:
    Object state = component.saveState(facesContext);
    component should be the same as before executing it.
    
    The return from this method must be Serializable
    Specified by:
    
    saveState in interface StateHolder
  - restoreState
```
public void restoreState(FacesContext context,
                         Object state)
```
    Description copied from interface: StateHolder
    
    Perform any processing required to restore the state from the entries in the state Object.
    
    If the class that implements this interface has references to instances that also implement StateHolder (such as a UIComponent with event handlers, validators, etc.) this method must call the StateHolder.restoreState(javax.faces.context.FacesContext, java.lang.Object) method on all those instances as well.
    
    If the state argument is null, take no action and return.
    
    Specified by:
    
    restoreState in interface StateHolder
  - isTransient
```
public boolean isTransient()
```
    Description copied from interface: StateHolder
    
    If true, the Object implementing this interface must not participate in state saving or restoring.
    
    Specified by:
    
    isTransient in interface StateHolder
  - setTransient
```
public void setTransient(boolean transientValue)
```
    Description copied from interface: StateHolder
    
    Denotes whether or not the Object implementing this interface must or must not participate in state saving or restoring.
    
    Specified by:
    
    setTransient in interface StateHolder
    
    Parameters:
    
    transientValue - boolean pass true if this Object will not participate in state saving or restoring, otherwise pass false.
  - markInitialState
```
public void markInitialState()
```
    Description copied from interface: PartialStateHolder
    
    The runtime must ensure that the PartialStateHolder.markInitialState() method is called on each instance of this interface in the view at the appropriate time to indicate the component is in its initial state. The implementor of the interface must ensure that PartialStateHolder.initialStateMarked() returns true from the time markInitialState() is called until PartialStateHolder.clearInitialState() is called, after which time initialStateMarked() must return false. Also, during the time that the instance returns true from initialStateMarked(), the implementation must return only the state that has changed in its implementation of StateHolder.saveState(javax.faces.context.FacesContext).
    
    Specified by:
    
    markInitialState in interface PartialStateHolder
  - initialStateMarked
```
public boolean initialStateMarked()
```
    Description copied from interface: PartialStateHolder
    
    Return true if delta state changes are being tracked, otherwise false
    
    Specified by:
    
    initialStateMarked in interface PartialStateHolder
  - clearInitialState
```
public void clearInitialState()
```
    Description copied from interface: PartialStateHolder
    
    Reset the PartialStateHolder to a non-delta tracking state.
    
    Specified by:
    
    clearInitialState in interface PartialStateHolder

Deutsche Übersetzung

Sie haben gebeten, diese Seite auf Deutsch zu besuchen. Momentan ist nur die Oberfläche übersetzt, aber noch nicht der gesamte Inhalt.

Wenn Sie mir bei Übersetzungen helfen wollen, ist Ihr Beitrag willkommen. Alles, was Sie tun müssen, ist, sich auf der Website zu registrieren und mir eine Nachricht zu schicken, in der Sie gebeten werden, Sie der Gruppe der Übersetzer hinzuzufügen, die Ihnen die Möglichkeit gibt, die gewünschten Seiten zu übersetzen. Ein Link am Ende jeder übersetzten Seite zeigt an, dass Sie der Übersetzer sind und einen Link zu Ihrem Profil haben.

Vielen Dank im Voraus.

Dokument erstellt 11/06/2005, zuletzt geändert 18/08/2025
Quelle des gedruckten Dokuments:https://www.gaudry.be/de/java-api-javaee-rf-javax/faces/validator/LongRangeValidator.html

Die Infobro ist eine persönliche Seite, deren Inhalt in meiner alleinigen Verantwortung liegt. Der Text ist unter der CreativeCommons-Lizenz (BY-NC-SA) verfügbar. Weitere Informationen auf die Nutzungsbedingungen und dem Autor.

Referenzen

Manuel PHP : https://docs.oracle.com, LongRangeValidator (Java(TM) EE 7 Specification APIs)

Diese Verweise und Links verweisen auf Dokumente, die während des Schreibens dieser Seite konsultiert wurden, oder die zusätzliche Informationen liefern können, aber die Autoren dieser Quellen können nicht für den Inhalt dieser Seite verantwortlich gemacht werden.
Der Autor dieser Website ist allein dafür verantwortlich, wie die verschiedenen Konzepte und Freiheiten, die mit den Nachschlagewerken gemacht werden, hier dargestellt werden. Denken Sie daran, dass Sie mehrere Quellinformationen austauschen müssen, um das Risiko von Fehlern zu reduzieren.

Class LongRangeValidator

Field Summary

Constructor Summary

Method Summary

Methods inherited from class java.lang.Object

Field Detail

VALIDATOR_ID

MAXIMUM_MESSAGE_ID

MINIMUM_MESSAGE_ID

NOT_IN_RANGE_MESSAGE_ID

TYPE_MESSAGE_ID

Constructor Detail

LongRangeValidator

LongRangeValidator

LongRangeValidator

Method Detail

getMaximum

setMaximum

getMinimum

setMinimum

validate

equals

hashCode

saveState

restoreState

isTransient

setTransient

markInitialState

initialStateMarked

clearInitialState

Referenzen